Manualshelf

Product Manual

ManualsBrandsShelterLogic ManualsKitchenMax AP 10 ft. x 20 ft. 2-in-1 White Canopy with Enclosure Kit
123456
05-23529-0CPage 5
Grommet Panels for Bungees
Grommet
Panel
10066
13107
5. PLACE COvER AND SECURE TO CANOPY FRAME
A. Place cover over assembled roof frame with grommet panels facing down, aligned with cross rails.
B. Make sure the cover is properly aligned on the frame, secure the four corners of the cover with bungees
(10066) to the frame rst. Attach remaining bungees.
Re-adjust bungees position along cross pole as needed to ensure a tight and even t of the cover to the frame.
Grommet Panels for Bungees
Grommet Panel
10072
13102
4. ANChOR ThE FRAME
There are four holes on each base foot that the anchor can go into.
A. Select a hole in each base foot. Insert each anchor into the ground until
the round head is touching the base foot.
B. Insert one anchor into all eight base feet.
This is a temporary spike anchor. Not intended for permanent use.
Anchoring Base Feet
10431
Secure Bungee Around Plastic BallInsert Bungee Cord Through Grommet