Product Manual

05-23529-0CPage 6
7. TIghTEN ThE COvER wITh TwIST TITE
™
A. Wrap the cord with plastic ball and "S" hook at the corners of the cover around the
corner leg poles. Insert "S" hook into the hole of the corner leg poles.
B. Twist each leg pole toward the inside of the shelter until the cover becomes tight
Twist the leg poles equally to ensure the cover stays aligned during tightening.
Twist-Tite
™
Tighten Cover
13105
10072
13101
6. ATTACh ENCLOSURE wALL AND DOOR PANELS
Canopy enclosure panels attach to frame with bungee cords.
A. Attach all the enclosure panels with bungees at the top rst. Adjust the panels as needed to ensure a tight
and even t before securing to legs with bungees.
B. When securing enclosure panels to legs, note that each bungee is shared with the neighboring panel.
NOTE: Door panels zippers must be closed when securing door panel.
CAUTION: Bungee Cords are under extreme tension. Use Caution when installing. Safety glasses are
recommended to prevent injury.
Interior / Rear View of Canopy Enclosure Panels
End Panel
10085
One bungee for
both panels.
Side Wall
Panel
10082