Owners manual

ManualsBrandsShelterLogic ManualsDoors & WindowsExtension Kit for Max AP 10 ft. x 20 ft. White Canopy (Fits 1-3/8 in. and 2 in. Frame)

Description

Qty. Part #

Bungee Cords

10066

10462

04-25730-0C 07/16/07

Model #25730

Tent Pole

Guy Ropes 11'

104376

Rope Toggle

10436

10458

Tent Pole Swedged

10459

Side Wall 2 12082

"S" Hook

Clamp

4 10464

Tetherball 4 10465

Anchors

10447

Ropes 3'

104634

Wing Nut

Bolts 1/4" x 1 1/2"

70008

30258

WARNING!

Use CAUTION when assembling this unit.

Manufacturer requires the use of safety

goggles during assembly. Bungees are

under extreme tension and may snap out

of your hand and cause injury. Be aware

of poles over your head during assembly

that may not be secured, and could fall

and cause injury.

Do not assemble near electrical over head

wires.

Two or more persons are recommended to

assemble this shelter.Estimated assembly

time:3 hrs.

Manufactured Under

U.S. Patents

D415,571 D409,310

D430,306 D414,564

Other Patents Pending

150 Callender Road

Watertown, CT 06795

800.524.9970

www.shelterlogic.com

ATTENTION:

FOR MISSING OR

REPLACEMENT PARTS

QUESTIONS

PLEASE CONTACT

CUSTOMER SERVICE:

1.800.524.9970

Assembly Manual Parts List

10'x20' Canopy Extension Kit

Step Ladder

Tape measure

Recommended Tools

Safety Glasses

Summary of content (3 pages)

PAGE 1
Model #25730 Assembly Manual Parts List 10'x20' Canopy Extension Kit Qty . Part # Anchors 6 10447 Clamp 8 10462 Rope Toggle 6 10436 Tent Pole 6 10458 Tent Pole Swedged 6 10459 Side Wall 2 12082 Bungee Cords 50 10066 Guy Ropes 11' 6 10437 Tetherball "S" Hook Ropes 3' 4 4 4 10465 10464 10463 Wing Nut 8 7000 Bolts 1/4" x 1 1/2" 8 3025 Description Recommended Tools Step Ladder Safety Glasses 800.524.9970 www.shelterlogic.
PAGE 2
ATTENTION: FOR MISSING OR REPLACEMENT PARTS OR QUESTIONS, PLEASE CONTACT Before You Start • 4 or more persons recommended to assemble • Estimated assembly time = 3 hours CUSTOMER SERVICE: 1.800.524.9970 STEP 1. ATTACH WINGS Walls attach to unit by Bungee Cords. Thread bungee cord through grommets in wall and wrap around pole. If using more than one wall, attach all the walls at the top first, then work your way around the unit wrapping the bungee cords through both corners of the walls and legs.
PAGE 3
Fig. D # 10458 # 10459 3' 3' 3' TOP VIEW OF ANCHORING WING KIT While lifting one wing out and up at the middle insert an extension pole into the tab at the middle of the wing. Make a knot in the end of one of the ropes and place it over the tab and pole end as shown in Figures C & D. Place the anchor securely in the ground about 3' from the extension pole. (Fig. E) Wing Wing Slide the rope clamp up the rope to tighten the wing.