Installation Instructions

ManualsBrandsShelterLogic ManualsCanopiesMax AP™ 10' x 20' Canopy Extension/Sidewall Kit, White (Fits frame styles 31757, 25757, 30522, 23522, 23571)

05-35730-0BPage 1

10' x 20'

MAX AP CANOPY EXTENSION KIT

Assembly Instructions

1-800-524-9970

1-800-559-6175

Canada:

3/12/10

DESCRIPTION MODEL #

10' x 20' MAX AP Canopy - Extension Kit - White

35730

Before you start: 2+ individual recommended for assembly, approximate time 1 hr.

Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.

THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.

RECOMMENDED TOOLS

Frame Not Included

Summary of content (5 pages)

PAGE 1
0' x 20' MAX AP CANOPY EXTENSION KIT Assembly Instructions Frame Not Included Description 10' x 20' MAX AP Canopy - Extension Kit - White Model # 35730 Recommended Tools Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored. THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE. Before you start: 2+ individual recommended for assembly, approximate time 1 hr.
PAGE 2
ATTENTION: This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic®, LLC custom fabric cover included. ShelterLogic®, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap and animal - bird excrement. Please anchor this ShelterLogic®, LLC structure properly. See manual for more anchoring details. Proper anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer.
PAGE 3
10' x 20' MAX AP Canopy - Extension Kit - Parts List - Model #35730 Quantity Part # Tent Poles 38 1/2" 6 10458 Tent Poles, Swedge 40 3/16" 6 10459 Bolts 1/4" x 1 1/2" 8 03025 Wing Nut 8 07000 Bungee Cords 50 10066 Extension Panel 2 12082 Tetherball “S” Hook Ropes 3' 4 4 4 10465 10464 10463 Temporary Spike Anchors 6 10447 Rope Toggle 6 10436 Clamp 8 10462 Guy Ropes 11' 6 10437 Description of Parts: Page 3 05-35730-0B
PAGE 4
NOTES: • Canopy extension panels attach to frame cross rails with bungee cords. • Leave Canopy Cover bungees in place when attaching extension panels. • Extension panels will not allow the canopy cover TwistTite mechanism to properly tighten the cover when extended. An alternate TwistTite Clamp system is included with this kit and shown in Step 5. 1. Attach Side walls to Frame A. If tightened at corner leg poles, disengage the TwistTite™ cord and “S” hook from canopy cover and corner legs.
PAGE 5
4. Anchoring and Rope toggles A. Thread the Guy Ropes 10437 through the Rope Toggle 10436 as shown below. Tie a knot at the end of the rope to keep it from sliding out of the rope toggle. B. Make a loop knot at the other end of the rope and place it over the tab the the top of the tent pole. C. Place the anchor securely in the ground about 3’ from each tent pole. D. Tighten anchor rope with rope toggle. This is a temporary spike anchor. Not intended for permanent use.