Product Manual

ManualsBrandsShelterLogic ManualsAccessories22 ft. x 24 ft. x 12 ft. Green Peak Run-In Shelter

Page 2

Basic Frame Assembly

STEP 1

STEP 2

Fit together an end rib using the following parts, (1) #11136 3-Way Top Connector, (4) #11068 Swedged Rafter Pole, (2)

#11013 Side Bend Tube and (2) #11016 Bend Corner Leg. Using (8) 11131 5/16 X 2 3/4" bolts and (8) 690 5/16" nuts

securely fasten the joints of all parts. Lay this rib on the ground at the rear of your shelters designated location. For a 12'

tall building be sure to include the two foot extension pipe (4551).

NOTE: Be sure that all of the heads of the bolts are facing toward the outside of the rib.

Fit together the first middle rib using the following parts, (1) #11135 Top Bend Tube, (4) #11068 Swedged Rafter Pole, (2)

#11013 Side Bend Tube and (2) #11019 Swedged Upright Tube. Using (8) #11131 5/16 X 2 3/4" bolts and (8) #690 5/16"

nuts. Securely fasten the joints of all parts. Lay this rib on the ground near the first end rib. For a 12' tall building be sure

to include the two foot extension pipe (4551).

Assemble the wind braces as shown in the

illustrations.

Fig.1

10' Tall Frame 12' Tall Frame

Fig.2

Use 11131

5/16" x 2 3/4"

Bolts

11136

11068

11013

11016

4551

Use 11131

5/16" x 2 3/4"

Bolts

11019

4551

11135

11068

11013

Use 11131

5/16" x 2 3/4"

Bolts

11136

11068

11013

11016

Use 11131

5/16" x 2 3/4"

Bolts

11135

11068

11013

11019

STEP 3

For Basic Frame

For 12' Tall Building

#648

#690

#11095

#11093

#648

#800053

#690

#648

#690

#11095

#11093