6' x 10' x 6'6" Shed-in-a-Box ® Peak Style Shelter Assembly Instructions Description 6' x 10' x 6'6" Shed-in-a-Box ® - Gray Model # 70403 Recommended Tools Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored. THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE. Before you start: 1+ individual recommended for assembly, approximate time 2 hr. 1-800-524-9970 150 Callender Road Watertown, CT 06795 www.shelterlogic.
ATTENTION: This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic®, LLC custom fabric cover included. ShelterLogic®, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap, animal - bird excrement and light snow. Please anchor this ShelterLogic®, LLC structure properly. See manual for more anchoring details. Proper anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer.
6' x 10' x 6'6" Shed-in-a-Box ® Parts List - Model #70403 Quantity Description of Parts: Part # Rafter Poles 35 1/8" 8 800071 Cross Rails, Swedge 41 5/8" Cross Rails 40 1/2" 6 3 802443 802439 Cross Rails 38 1/8" 6 13215 Upright Poles, 26 3/8" 8 802285 Upright Poles, Swedge 18 1/8" 4 802440 Middle Poles 36 3/4" 4 802445 Corner Leg Bends 4 802427 Side Corners 8 800601 Top Connectors 4 802606 Steel Foot Plate 4 802610 ShelterLock™ 8 800597 Ratchet Clamp 8 10240 Round Head
1. LAY OUT ROOF FRAME 800601 REAR 802443 800601 800601 802439 802443 800071 800071 800071 800071 802606 802606 802606 802606 802443 802439 802443 800071 800071 802443 800601 800071 FRONT 800601 800071 802439 802443 800601 800601 800601 2. ASSEMBLE ROOF FRAME Use bolts as shown in illustrations.
3. ASSEMBLE LEGS & ATTACH TO ROOF FRAME Use bolts as shown in illustrations. A. Assemble Corner and Middle legs. B. Attach legs with bolts on one side of roof frame, let the other side of roof frame rest on the ground. C. Attach remaining legs with bolts to opposite side of roof frame.
5. Squaring up the Frame A. Place frame in its final location, which needs to be as flat and level as possible. B. Measure across opposite corners. These distances must be equal to within 1 inch. C. Check that the front and rear of the frame measures 6 feet in width 1,8m 1,8m 6. Properly Anchor the Frame A. Anchors must be placed inside shelter at the corners of the shelter. B.
. Door and solid End panel installation A. Hold end panel at the top center with white inner surface facing inside of the shelter. Wrap the edges of the fabric panel around the end rib. B. Disconnect top rail from the end rib. Pass the top cross rail through the gap in the fabric, in between the webbing and rib frame. Re-attach top cross rail to end rib. Repeat Step B for side cross rails. C.
. INSTALLING COVER AND COVER RAILS A. Lay the cover on the ground next to the frame with inside of the cover (the side with the pipe pockets) facing down and the webbing on the front and rear of the corner of the building. B. Pull cover over the frame, making sure to center cover on frame. There should be an equal amount of over- hang at all four corners. C. Insert the “S”- Hook on ratchet into hole on the leg bend. Insert the webbing into the spindle of the ratchet and pull tight.
