Instructions / Assembly

ManualsBrandsShelterLogic ManualsCarports & Garages8 ft. W x 8 ft. D x 8 ft. H Green Garage with Corrosion-Resistant Steel Frame and UV-Treated PE Fabric

Page 5Page 5

3. INSTALL SIDE RAILS AND SHELTERLOCK

™

STABILIzER BLOCKS:

A. Place assembled rst end rib in the staked area. Place the

ShelterLock

™

on the upright as shown in Detail D. From the

outside of the rib insert the bolt through the upright and then

through the ShelterLock

™

B. Place the plain end of the side rail over the bolt and nest

it into the ShelterLock

™

. Install the nut onto the bolt and

tighten. Repeat these steps for the opposite side and all of

the remaining ribs. The side rails for the last rib will have two

plain ends.

4. INSTALL WIND BRACES:

A. Attach wind brace between the end rib and the rst

middle rib as shown in Detail E. Bolts attached at the

cross rails should be inserted facing inside the shelter.

5. INSTALL TOP RAIL:

A. Place the rst top rail under each end rib and secure it

with a bolt as shown in Detail F. The same cross rail should

lay on top of the all middle ribs. Secure the rails to the frame

with the hardware indicated in Detail F. The top rail attached

to the last rib will be installed under the pipe.

DETAIL D

DETAIL E

DETAIL F

FIRST

MIDDLE

RIB

WIND BRACE

END RIB

00669

10210

Install the Top Rail

OVER all Middle Ribs

UNDER First and Last Ribs

Fig. 2

800260

1010

10135

00670

02030

05-10DT13-0A