Instructions / Assembly

05-20DT13_0BPage 5
ASSEMBLY OF PEAK STYLE GARAGE SHELTER
NOTE FOR FRAME EXTENSION KIT: 8’ x 8’ is the base frame dimension. Your model may have more middle
ribs than shown in the illustrations. You will receive one extra rib for every extra 4 feet of building length that you
purchase. The basic frame assembly will remain the same. The cover will be the correct size for the length of the
building ordered.
1. PLOTTING AND SQUARING UP THE FRAME:
A. Before building your shelter, you should choose a at area
on your property and plot your shelter. Stake out the area
for the frame in the desired spot. Check that it measures
8' in width and the length would be determined by the size
shelter you purchased. Tie a rope diagonally from corner to
corner.
B. Measure across area, end to opposite end. See Detail A.
The measurement A and B should be equal.
8'
8'
A
B
LENGTH
OF
BUILDING
DETAIL A
2. ASSEMBLE END AND MIDDLE RIBS:
A. Assemble end and middle ribs as shown in Detail B and Detail C.
Securely fasten all of the joints with the hardware indicated.
DETAIL B
End Ribs
DETAIL C
Middle Ribs
800467
10223
10226
800466
10223
10226
10210
3" Bolt
10114
2" Bolt
800467
10223
10273
800466
10223
10273
802630
10114
2" Bolt
10' HIGH
10226 10226
10273 10273
802630
3” Bolt
10114
2”
Bolt
10210
3” Bolt
10114
2”
Bolt
800466
800467
800467800466
8' HIGH
3" Bolt