Instructions / Assembly

05-20DT13_0BPage 6
10210
800260
01010
DETAIL D
02031
02031
3. INSTALL SIDE RAILS AND SHELTERLOCK
™
STABILIZER BLOCKS:
A. Place assembled rst end rib in the staked area. Place the ShelterLock
™
on the upright as shown in
Detail D. From the outside of the rib insert the bolt through the upright and then through the ShelterLock
™
.
B. Place the plain end of the side rail over the bolt and nest it into the ShelterLock
™
. Install the nut onto the
bolt and tighten. Repeat these steps for the opposite side and all of the remaining ribs. The side rails for
the last rib will have two plain ends.
02030
02030
10205
10205
DETAIL E
FIRST
MIDDLE
RIB
WIND
BRACE
WIND
BRACE
END RIB
02031
02031
10110
10110
4. INSTALL WIND BRACES:
A. Attach wind brace between the end rib and the rst middle rib as shown in
Detail E. Bolts attached at the cross rails should be inserted facing inside the shelter.
Assemble cover rails as shown.
Middle Rib Cross Rail Clamps
10115
10111
01010
End Rib Cross Rail Clamps
10115
10112
01010