Instructions / Assembly

05_10B163_0EPage 7

3. INSTALL SIDE RAILS AND SHELTERLOCK

™

STABILIZER BLOCKS:

A. Place assembled rst end rib in the staked area.

Place the ShelterLock

™

on the upright as shown in

Detail D. From the outside of the rib insert the bolt

through the upright and then through the ShelterLock

™

B. Place the plain end of the side rail over the bolt and

nest it into the ShelterLock

™

. Install the nut onto the

bolt and tighten. Repeat these steps for the opposite

side and all of the remaining ribs. The side rails for the

last rib will have two plain ends.

NOTE: Sliding Cover Rail (11105) should be attached

to frame after Step 9, once cover is installed. See Step

10.

4. INSTALL WIND BRACES:

Attach wind brace between the end rib and the rst middle rib as shown in Detail E.

Bolts attached at the cross rails should be inserted facing inside the shelter.

DETAIL D

DETAIL E

FIRST

MIDDLE

RIB

WIND BRACE

END RIB

11102

11104

800442 on

20' high only

11104

800372

00690

800454

WIND BRACE

800440 for 16'

and 20' high

11131

11134