Specifications

DX-BT24-S MODULE SPECIFICATION
Shenzhen DX-SMART Technology Co., Ltd. www.szdx-smart.com
- 13 -
Pin name Pin number I/O describe Remark
RST 14 DI Module reset Active low ；NC if not used
Table 6：RST pin definition
Module status Method of operation Result
Hibernation Pull down the RST pin for at least 200ms and then release Reset wake
Other status Pull down the RST pin for at least 200ms and then release Reset
Remark
The RST signal is more sensitive to interference, so it is recommended that the trace should be as
short as possible, and it needs to be handled with ground.
Figure 6：Reset reference circuit
Figure 7：Key reset reference circuit