Specifications

DX-BT24-T MODULE SPECIFICATION
Shenzhen DX-SMART Technology Co., Ltd. www.szdx-smart.com
- 20 -
seriously. In the process of R&D, production, assembly and testing, especially in product design,
ESD protection measures should be taken. For example, at the interface of the circuit design and
the points that are easily damaged or affected by electrostatic discharge, anti-static protection
should be added; anti-static gloves should be worn during production.
Table 14：Table of ESD withstand voltage of module pins
Test interface Contact discharge Air discharge unit
VBAT & GND +4 +8 kV
Main antenna interface +2.5 +4 kV
4.
Mechanical Size And Layout
Recommendations
This section introduces the mechanical dimensions of the module, all dimensions are in
millimeters; for all tolerances that are not marked, the tolerance is ±0.3 mm
4.1. Module Mechanical Size