Specifications

If the FCC identification number is not visible when the module is installed inside another device,
then the outside of the device into which the module is installed must also display a label
referring to the enclosed module. This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: 2AKS8-DX-BT24-T Or Contains FCC ID: 2AKS8-DX-BT24-T”
The devices must be installed and used in strict accordance with the manufacturer's instructions
as described in the user documentation that comes with the product.
The module is a limited module. Any company of the host device which install this modular with
limit modular approval should perform the test of radiated emission and spurious emission
according to FCC part 15C : 15.247 and 15.209 requirement, Only if the test result comply with
FCC part 15C : 15.247 and 15.209 requirement，then the host can be sold legally.