USER MANUAL
1 Precautions • • • • • Liquids - Do not expose your device to liquids or extreme humidity. Liquids can get into the product’s circuits, leading to damage and corrosion. If it does get wet, don’t try to accelerate drying with the use of an oven or dryer, as this may damage the device. Extreme heat/cold – Avoid placing your device near a heat source or in direct sunlight. Extreme temperatures can cause the battery to swell, leak or malfunction. Cleaning – Use a clean cotton cloth.
B A Pictures are for illustration purposes only. Actual items may slightly vary in appearance and design.
Battery Management 1. 2. 3. Connect the Micro USB cable (included) to the Micro USB port on the Powerplay 2 and connect the USB Cable to the Power Charger Adapter Plug. Plug the Adapter Plug into an electrical wall outlet to fully charge the battery (approx. 8 hours). Red indicator light is on while charging and will turn off when fully charged. Do not charge additional devices while charging the Powerplay 2, this will damage the device. 4. The number indicate % of battery life on Powerplay 2.
Pairing your Bluetooth enabled device to your Powerplay 2 Powerplay 2 doesn't work with all apps. 1. 2. Go to your mobile device’s Network Settings. Set your Bluetooth device to discover. Follow your device’s instruction guide. This usually involves going into a “setup”, “connect” or “Bluetooth” menu.
Step 1 Android Settings>Wireless & nework settings> Bluetooth Settings>Bluetooth devices
Step 2 iPhone Settings>Bluetooth>Devices
Step 2 Android Settings>Wireless & nework settings> Bluetooth Settings>Bluetooth devices
3. 4. 5. 6. Push key 3 seconds to turn on Bluetooth. Locate the Powerplay 2 on your Bluetooth device & select “Powerplay2” from the list. Keyin password “0000". Your Powerplay 2 will beep when pairing is complete. Using key to play and pause music playing.
Step 3 Android Settings>Wireless & nework settings> Bluetooth Settings>Bluetooth devices
Android In case of unsuccessful pairing, repeat the steps on previous pages.
6 Charging Devices 1. 2. 3. Connect the USB end of the charging cable that came with your mobile device to the OUT port on the Powerplay 2. Connect the micro USB end to your mobile device. During charging, the red indicator light IN will stay on.
7 Hands-free calling 1. Make, receive and end call by push bottom. 2. Control volume by using Powerplay 2 3. When not using the Powerplay 2 bluetooth, press bottom 3 seconds to turn off to save power. .
8 Specs • • • • • • • • • • • • • • • Weight < 7.4 ounces Size: 4.65 inches (L)*1.54 inches (W)*1.54 inches (H) Rechargeable Battery: Lithium - polymer 3.7V 5200 mAh Power Consumption: DC5V/500mA ~1A Super High Capacity Rechargeable Battery 5200mAh, about 300% of iPhone 4 battery life Speaker Frequency: 100Hz ~ 20KHZ Frequency Range: 2.4000Ghz-2.
