User's Manual
11
1) If you use ADSL connect the internet, please follow step 1-4 as graphical shown to connect
your device.
2) If you use Residential broadband, put the network line into the WAN port and follow the step
3-4 as graphical shown to connect your device.
Set Steps:
① Connect the modem.
② Please connect reticle what you ever connected to the computer with the router's WAN port.
③ Use another reticle to connect your computer Ethernet port with the router’s LAN port.
④ Connect the router’s power adapter. And the hardware connection is finished.
Note
Please use the matched power adapter otherwise it will damage the router.
2.4
Configure local PC TCP/IP Settings
Before you log in to the router, please make sure your computer set to
“Obtain an IP address
automatically” and “Obtain DNS server address automatically” from the device.
① Click Start -> Control Panel.