User's Manual

Knowledge Expansion

 AutoSelect: Under the “AutoSelect” the wireless signal will choice the user number is the

least channel to improve the efficiency of the signal, it works for most cases.

 If you choice other mode, the channel will not change all the time not matter the channel is

good or bad.

3.4 Network Settings

Click “Network Settings” enter the Network setup web page，in this page you can set “WAN

Settings”, “WAN Parameters”, “MAC Address Clone”.

3.4.1 WAN Settings

Plug Internet cable to PW5002 WAN port.

Set Steps：

① Enter the web and Select “Network Settings”.

② Click the “WAN Settings”.

Parameters Specification:

 Connection Type: It displays the routers mode.