User's Manual

56
 Destination IP: The IP address of the final destination. “0.0.0.0” indicates any network
segment.
 Subnet Mask: The subnet mask for the specified destination.
 Gateway: This is the next router on the same LAN segment as the router to reach.
 Interface: The interface between your router and the final destination.
3.9 Traffic Control
Traffic control is used to limit communication speed in the LAN. Up to 20 entries can be
supported with the capability for at most 254 PCs' speed control, including for IP address range
configuration.
Set Steps：
① Click “Traffic Control” enter the configure page.
② Traffic Control Enable
③ Enter the IP Range, such as 192.168.101~192.168.101
④ Select Up/Down, Select up for example
⑤ Enter the Max Bandwidth, such as 1024
⑥ Select “Apply”
⑦ Click “Add”, the information you configured will show in the list.