Shen Zhen MTC 300M Wireless Range Extender : User's Manual : Page 36

36

Set Steps：

① Click ―WLAN Settings‖

② Select ―Basic Settings‖

③ Select Network Mode

④ Enter SSID name (Default name is RE300X_XXXXXX)

⑤ Select ―Channel‖

⑥ Select ―Channel BandWidth‖

Parameters specification:

 Network Mode: The currently used network mode, the default is 11b/g/n mixed mode.

 SSID: It is the unique name of the wireless network and can be modified.

 Broadcast (SSID): Select ―Enable‖ to enable the device’ SSID to be scanned by wireless

devices. The default is enabled. If you disable it, the wireless devices must know the SSID for

communication.

 BSSID: This is the MAC address of the device's wireless interface. A wireless signal

corresponding to one unique BSSID.

 Channel: The currently used channel by the device. Select an effective channel of the

wireless network. The default is AutoSelect.

 Channel bandwidth: Select a proper channel bandwidth to enhance wireless performance.

This option is available only in 802.11b/g/n. Wireless speed in the channel bandwidth of 20/40

is 2 times in 20.