User's Manual

40
3.5.3 Advanced Settings
In this section, you can configure the advanced wireless setting for the device. Including
Beacon Interval, TX Power and Basic Data Rate and so on; if you have no idea how to configure
these wireless rules; keeping its default value is advisable.
Note
 If you are not professional, not recommended for the page Settings, in order to avoid
wireless performance becomes poor.
Parameters specification:
 BG Protection Mode: To 11b/g wireless client, under the complex mode can smoothly
connected to 11n wireless network. The default is ―Auto‖.
 Basic Data Rates: According to actual needs, adjust the wireless basic transmission rate.
The default value is 1-2-5. 5-11 MBPS. Suggest not change the default value.
 Beacon Interval: Regular broadcasts wireless SSID time interval. In general, the smaller the
time Settings, the faster the client access to the device. The bigger the time set, the greater
the wireless network data transmission efficiency. The value is between 20 and 999, the