User's Manual

42
1. Select ―Off‖ to allow all wireless clients to join your wireless network.
2. Select ―Allow‖ allow ONLY the specified wireless clients to join your wireless network.
3. Select ―Block‖ disallow ONLY the specified wireless clients to join your wireless network.
Wireless Access Control Application Example:
To only allow your own notebook at the MAC address of 00:12:35:EC:DF:25 to join your wireless
network.
Set Steps：
 Select Allow.
 Enter the MAC address of the wireless device you want to restrict. Here in this example, enter
00:12:35:EC:DF:25.
 Click ―Add‖ to add the MAC address to the MAC address list.
 Click ―Save‖ to save your settings.
Tips
 Up to 10 wireless MAC addresses can be configured
 If you don't want to configure the complex wireless security settings and want to disallow
others to join your wireless network, you can configure a wireless access control rule to allow
only your own wireless device