User Manual
1．Interface description 1. 2. 3. 4. 5. 6. 7. RJ45 Port：LAN0 In standard routing mode, LAN can be used as WAN. RJ45 Port：LAN1、LAN2、LAN3 DC/USB Power Port：DC/5V, USB/5V DC Port use 2.5mmStandard round head power supply Port，USB use Micro USB Port. External WIFI Antenna Port：SMA screw hole Port。 RESET：Press this button for 5 seconds at startup,SYS light will flash, then restart it, Reset successfully. USB Port：USB2.
Indicator light status description Name State Description LAN0-LAN3 Light flashing RJ45 Port Connected destroy RJ45 Port Not Connected bright Wireless is working flashing It is transferring data red Light up, battery charging state. green Light up, the battery is full of state. yellow Light up, low battery state. destroy WPS function off flashing WPS function starts.
Landing router Next you will log on to the router Web Settings page. Enter “192.168.0.1” in the Web browser address bar,,Enter the login user name and password i n the pop-up box.Please lose the default user name when logging in for the first time： admin, Password：admin。 Enter the router Web Settings page After Enter, Go to Web Set UI,then you can set and manage the modem.
3．Working Mode CPE supplies 4 working mode：4G wireless mode（Default）、Standard wireless modem mode、Wireless AP+Wireless client bridge mode、Wireless AP+Wireless client mode.
1.4G Wireless Modem Mode. CPE Set 4G Wireless modem mode as default, Insert 4G SIM card, the modem will identify 4G automatically. You can also define the network operators you need to choose. 2.Standard modem mode 1）Static online mode Enter the router management interface work mode to select the standard routing mode,W AN Set the static address on the Internet,Enter the IP address, network mask, gateway, DNS and other related parameters provided by the ISP,then confirm.
Enter the router management interface work mode to select the standard routing mode， WAN Set up the online mode to select the dynamic address, choose confirm,The router will automatically get the parameters assigned by the ISP. 3）PPPoE online modem Enter the router management interface work mode to select the standard routing mode， WAN Set up the online option . PPPoE,Enter the user name, password and other relevant parameters provided by the IS P, Choose Confirm. 3.
（1）Click on LAN Settings to search for wireless network, （2) You can see the valid wireless AP name in the current range and select the corresp onding wireless AP.
（3) Enter the selected wireless AP password, and you can bridge the first level wireless AP. 4. Wireless AP+Wireless client mode Router management interface -- working mode -- wireless AP+ client mode, click confirm. Wireless-Connection--Choose ApClinet from the drop-down menu-Dynamic addr ess (automatically obtained from DHCP server),Click on the search wireless net work.
4．Wireless security Settings 1．ireless security There are several types of wireless security modes, and different security modes can be selected as needed. • Block up • Open System • WPA-PSK • WPA2-PSK • WPAPSKWPA2PSK(WPA-PSK and WPA2-PSK mode) 2. Open System The encryption type in this security mode is.
Description UI： UI Description Encryption ty pe There are two types of encryption available: None and WEP.Select None to be unencrypted, and choose WEP to encrypt the Settings interface. As shown. WEP Encryption le ngth There are two encryption lengths available: 64bit and 128 bit.The default value is 64bit. The default k ey ID You can set four keys at the same time, but only one key can be used in the present.This is the key you want to us e today.The default value is key 1.
UI Interface Description: UI Description Safe mode WPA-PSK。 Encryption ty pe TKI or AES WPA-PSK Key Key update interval Set the key, the legal key length is: 8-63 ASCII character s or 64 hexadecimal digits (0~9, a~f or a~f). Set the key update time interval in seconds. 4.
CPE-CPE 5. WPAPSKWPA2PSK 5．Equipment management 1． Equipment function UPnP protocol is used by Windows ME, 2000,XP,Win7 and other systems.If enabled, the se operating systems will automatically find the router through the protocol. UPnP（Universal Plug and Play）,IIt is mainly used to realize intelligent interconnection of equipment, without user p articipation and use of master server, which can automatically detect and control various network devices from various manufacturers.
(1) Save the router upgrade file to the local computer. (2)Click on the > button to select the software that needs to be upgraded. (3) Click the upgrade > button to start the upgrade. 3． Ex-factory value • The wireless router will be restarted during setup. The restore to factory Settings will clear all Settings for the wireless router and revert to t he initial state.
STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
