User's Manual

Indicator light status description
Name
State
Description
LAN0-LAN3
Light
flashing
RJ45 Port Connected
destroy
RJ45 Port Not Connected
WIFI
bright
Wireless is working
flashing
It is transferring data
BAT(A
battery)
red
Light up, battery charging state.
green
Light up, the battery is full of state.
yellow
Light up, low battery state.
WPS
destroy
WPS function off
flashing
WPS function starts.
INTERNET
bright
The connection is successful
flashing
Connecting
PWR
destroy
Power off
bright
Power on
2.Set to Prepare
Connect device
You can connect your computer and modem under the below steps.
Set the Computer IP Address
Before accessing the Web Settings page.It is recommended that you set the computer to
"automatically obtain IP address" and "automatically obtain DNS server address".The IP
address is automatically assigned by the router.If you need to specify a static IP address
to the computer.The IP address of the computer should be set in the same subnet as the
LAN port IP address of the router (the router's LAN port default IP address is：
192.168.0.1, The subnet mask is:255.255.255.0）.
Connected by WiFi
Detect the wireless network connection of the wireless router,Then click the 'connect' butt
on to establish the connection.The WiFi Password is ：12345678。
Make sure the computer is connected to the router
When your computer shows that IP has been successfully obtained,Please use the Ping
command to confirm whether the computer and the router are connected successfully.
For example, in a Windows XP environment. Perform Ping command
：Ping 192.168.0.1
If the screen is shown below.Indicates that the computer has successfully connected with
the router.