Instruction Manual

ManualsBrandsSHEN ZHEN TOMSTAR TECHNOLOGY ManualsWearable Technologysmart watch

Smart Watch Instruction Manual

Combining low-power Bluetooth chip and high-tech sensor technology, the smart

watch can monitor data related to sports and health such as walking, running, cycling,

basketball, football, table tennis, heart rate, blood pressure and sleep. Meanwhile, it can

synchronize information such as time, weather and message. It is also equipped with

functions such as mobile phone loss prevention, sedentary reminder and alarm clock

reminder.

■ How to Wear

1. Refer to the figure to correctly wear the watch;

2. Buckle the watchband according to the comfort level (make the heart rate light close to your skin

surface, and avoid looseness).

※ Function Operations

ON/OFF

ON: long press the key on the side for about 2s, and it will power on and the display is on

after a vibration;

OFF: long press the key on the side for about 2s, and it will power off after a vibration.

Connect the watch to your mobile phone: download and install “FunDo” on the phone (two

available ways):

1. IOS and Android: scan the QR code of the watch via mobile browser (settings – APP

downloading) or directly scan the following QR code. Download the first one or scan it

via WeChat. After you open the interface, click options in the upper right and use your

mobile browser to open and download.

Summary of content (8 pages)

PAGE 1
Smart Watch Instruction Manual Combining low-power Bluetooth chip and high-tech sensor technology, the smart watch can monitor data related to sports and health such as walking, running, cycling, basketball, football, table tennis, heart rate, blood pressure and sleep. Meanwhile, it can synchronize information such as time, weather and message. It is also equipped with functions such as mobile phone loss prevention, sedentary reminder and alarm clock reminder. ■ How to Wear 1. 1.
PAGE 2
. Android: search “FunDo” in the Yingyongbao to download; IOS: search “FunDo” in the APP Store to download. After it is downloaded, please allow all permissions occurred during the installation (the watch and mobile phone require to connect to Bluetooth 3.0 and Bluetooth 4.0, ensuring that all functions can be realized). How to connect to Bluetooth 4.0: After it is successful to download, you can find a turn-on notification prompt after opening “FunDo” and mobile Bluetooth, then click “OK”.
PAGE 3
■ Interface switch ● Dial plate switch: long press the dial plate interface for 3s to switch dial plates. Slide the screen left and right to switch the dial plate and click OK to switch. ● Drop down menu: slide the dial plate interface from the top to the bottom and the interface shows functions such as do not disturb mode, weather, brightness display, connection and settings icon.
PAGE 4
● Notification: enable to check instant messages of APP such as QQ and WeChat (such function requires to connect to your mobile “FunDo”). ● Pedometer: enable to check today’s walking steps, calorie burned and walking distance. It will automatically save all data of the day at 24:00 and it returns to 0. Users are enabled to check all data of the day and historical data in the APP, and change daily walking goal in the step counting interface.
PAGE 5
● QR Code: scan the QR code to download and install via your mobile phone ●Sleep Monitoring: record your sleep length and quality from 9pm to 9am, helping you adjust your timetable better and improve sleep quality. Slide up and three options are displayed: status (turn on or turn off), history (check deep sleep and light sleep length), and help (instructions in detail). ● Bluetooth: search devices you intend to connect to, or disconnect the device that is in the connected state.
PAGE 6
● Anti-lost: click to find and the mobile phone will sound the alarm; or enter the mobile APP find function and the watch will sound the alarm. ● Bluetooth Photography: the watch will enter the Bluetooth photography when the mobile display isn’t locked, then your mobile phone enters the photography interface. Click the watch to take photos and they will be saved on your mobile phone.
PAGE 7
● Motion: flip to mute incoming call, flip to mute alarm, make gestures to wake (raise to wake), shake to answer the phone. ● ● Calendar: check calendar ● Power-saving: open to enter the power-saving mode ● Settings: set the watch Bluetooth Settings: enter to turn on or turn off Bluetooth; Clock: clock type and multiple standby dial plates are available; it is the default option that opens the time synchronization function.
PAGE 8
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.