Instruction Manual

Off: In the initial interface of the watch, long press the key on the side for about 3S, and the interface shows power off.
Connection between watch and mobile phone: First of all, the mobile phone should download app “Da fit” to the mobile phone and install it. (to search and connect
the watch through Da Fit, you can’t directly search and connect the watch through Bluetooth of the mobile phone)
Mode 1: IOS, Android mobile phone users can download the QR code directly by scanning the QR code below or scan the QR code of the watch by using the mobile
browser (watch QR code path: Set - QRcode)
Da Fit
Method 2: Open the app store of mobile phone, search “Da Fit” to download and install.
Attention:
Turn on Da Fit, select to connect the watch, turn on the message reminder switch, and turn on the corresponding function switch as needed.
When uploading the custom dial or the dial in the dial market, the watch power must be more than 30%, otherwise the dial cannot be uploaded to the watch, and the
watch power is low.
Choose to upload the dial market, you need to open the data network by mobile phone.
When a new watch is used for the first time, it needs to be connected to Da Fit to synchronize time, date and data.
When the watch is connected with Da Fit, pull down the button in the initial interface of the watch. You can see the Bluetooth connection icon in the