User's Manual

C- choosing model

D Choose Battery mode

●Menu display: SYS 16 (helicopter mode) - HELI/ACRO

●Function: Model parameter model selection

●Function description: This transmitter support helicopters and airplane, you can select according to your

model.

●Setting method:

1 press and hold Menu to enter parameter setting mode, press Menu button 15 times, till SYS 16 being

displayed.

2 When MD H or MD A shown, press UP to choose model, Helicopter or Airplane, Press +/- to switch to your

model wanted.

3 Press down button to confirm operation, SURE will be shown during saving, press and hold +button to

save the change, press any other button to cancel

edit.

●Menu display: BAT 17 (Helicopter mode) - LI /NOR /NIMH

●Function: Battery mode - LI /NIMH

●Function description: This transmitter support multiple battery types. E.g. NOR for Alkaline 4S, NIHM/NICD

4S, LIPO/Lith 1S. Different type of batteries have different low voltage alarm value. Using correct battery

mode will

extent the battery life.

Caution! Support voltage from 3.7~6.0V

●Setting method:

1, Press MENU to enter BAT battery type BAT 17

2, Press UP/DOWN switch between different types

3, Press and hold + button to confirm and save the setting.

Basic opera tion

Initial setup

Under SYS16 Press Up

button switch to Model

selection.

Press MENU to NO.17

Press +/- to select Heli

Press UP/DOWN to select

ACRO means airplane

Press + to save

Warning