User's Manual

12 GYRO Sensitivity mix

13 NPI （normal pitch curve）

●Function description

This function can be used to adjust the sensitivity of the gyro.

3 modes available in this transmitter, normal, Idle, Hold. The Gyro has the same 3 modes respectively. The

greater the ratio is, the more sensitive the gyro, and vice versa.

When the servo is shaking or vibrating,

that means the gyro sensitivity is too high, try to lower the sensitivity

till the servo back to normal.

●Setting method

1, select EYO 12 under setting mode

2, use +/- button to turn the function on/off, press up/down button to select flying mode, press +/- button to

change the value.

Press and hold Menu to exit or press menu to switch to next item

●Function description

Pitch curve is a curve with 5 editable points. With the adjustment of the pitch curve, can optimize the control

stick with flying performance. Editable value range is between 0~100%. The adjustment of the

pitch curve

need to be used combined with throttle curve which allows the main RPM of the rotor can be maintained with

the control stick moving.

●Setting method

1, choose NPI 13 under setting mode

2, Press UP/DOWN to select position, press +/- to change value

3, Press and hold Menu to

exit or press menu to switch to next item

Helicopter