User's Manual

14 IPI Idle pitch curve

15 HPI (throttle hold Pitch curve)

●Function description

Use this function to set the pitch curve for idle flying. The curve has 5 editable points. When idle

mode is active, the idle pitch curve will optimize the engine and rotor's output. The editable value

range is between 0 ~100%. Do not set the highest value over

the max value that corresponding to

the max engine RPM value. Normally we set to one step smaller. The minimum pitch will base on the

maneuver's specific requirement.

●Setting method:

1, choose IPI 14 under setting mode

2, press up/down to choose position, press +/- to adjust the value

3, Press and

hold Menu to exit or press menu to switch to next item

●Function description

This function is to set the pitch curve when the throttle being held.

●Setting method

1, select H PI 15 under setting mode

2, press UP/DOWN to select position, press +/- to change the value

3, Press and hold

Menu to exit or press menu to switch to next item

Helicopter