User's Manual

12 ADIF aileron differential
13. ELFL Elevator Flaperon mix
●Function description
This function is to use to make differential for the aileron on both sides when using 2 servos.
AIL1↓ Aileron 1 down AIL1↑ Aileron 1 up AIL2↓ aileron 2 down AIL2↑ AILERON2 up
When turning using aileron, you will need more aileron travel on up direction.
●Setting
method
1, select ADIF 12 under setting mode
2, press +/- button to switch between ON/OFF, press UP/DOWN to choose the position, press +/- to change
value.
3, Press and hold Menu to exit or press menu to switch to next item
●About Flap-aileron mix and aileron differential
You need to choose
one mode which is more suitable for yourself. If you would like to let the aileron work just
like flaperon, you will better choose FLER. If you have 2 aileron servos and 2 flaperon servos, ADIF will be a
better choice.
●Function description
This function is for flaperon and elevator can
act respectively. In any situation, the move of elevator will lead
to the raise or down of flaperon, in order for better performance on idle maneuver. Most of the time when
elevator goes up, flap goes down. Use the switch to control this function.
RATE↑ Flaperon upper travel mix rate RATE↓ Flaperon lower travel mix rate
●Setting method
1, select ELFL 13 under setting mode
2, press +/- button to switch between ON/OFF, press UP/DOWN to choose the position, press +/- to change
value.
3, Press and hold Menu to exit or press menu to switch to next item
27
Airplane