Shen Zhen WFLY Technology Development RADIO CONTROL SYSTEM : User's Manual : Page 9

Basic operation

When you want to browse or change a current setting of the transmitter, please follow the procedure as

below,

1, press and hold menu button for 1 second to enter setting mode, the screen will show Menu REVR01

Initial interface Parameter setting mode Sub trim mode

2, Press Menu button,

Item name will be changed according to the sequence, press until your tatended

option being displayed. Eg. SUBT04 for sub trim. Description is SUBT menu sequence is 04;

3, Press UP/Down button to select the item to be edited, eg. CH2 channel value.

4, press +/- button to change the value

5,

When changing the value under HOLD or CUT items, you need to press +/- button to activate the current

setting. (display ON) before you can use UP/DOWN button to switch between edit items, then use +/- button

to set your value.

6, Press Menu button to save after successfully changed the

value and exit the current interface.

Caution Data will NOT be saved if you didn't press menu button to save and exit

Caution: The function of the transmitter are displayed in order,

please read the setting

instructions before create your model data. ( read the instructions carefully if you don't

know how to use the mix function)

Basic opera tion

Caution

9