User's Manual

12. ELEV-FLAP
ELEV-FLAP mixing is the first pre-programmed mix we’ll cover.
This mix makes the flaps drop or rise whenever the elevator
stick is moved. It is most commonly used to make tighter pylon
turns or squarer corners in maneuvers. In most cases, the flaps
droop (are lowered) when up elevator is commanded.
Setting
Method:
Use up/down button to select ELEV-FLAP, OK button
is to enter editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to set value. Press OK button for seconds can
back default.
3. Press EXIT after setting.
INSTRUCTION
GLIDER
143