User's Manual

(18). SPEED OFS
(19).
Code matching
This function is used to offset the aileron, elevator, and flap servos
for minimum drag in cruise and high-speed flight. Normally the
ailerons and flaps are raised about 3-5.
Setting Method:
Use up/down button to select SPEED OFS, OK button is to enter
editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to active or inhibit this function. Press OK
button for seconds can back default.
3. Press EXIT after setting.
INSTRUCTION
GLIDER
Please refer to page 16.
156