User's Manual

2. DUAL RATE & EXPONENTIAL SETTING
(1). AIL
(2). ELE
(3). RUD
Dual rate is to adjust aileron, elevator and rudder travel range.
The range is between 0%-120%.
Exponential setting is to adjust aileron, elevator and rudder
sensitivity when the sticks are around the middle. The range is
between -100% to +100%.
Setting Method:
1. Select channel
Aileron, elevator and rudder are selectable.
Press +/- buttons
to select channel, OK button to finish setting.
2. Set the switch and its position(0,1,2)
Press direction button to select “SWT”, edit it. +/- buttons can
select function switch(A-F).
After selecting the function switch, press right direction button
to enter the
switch position setting, use +/- buttons to set.
3. Set dual rate
Press direction button to select “D/R”, edit it. Edit one or two
parameter.
+/- buttons can increase or decrease the value.
Press the OK button is to back default.
4. Set exponential
Press direction button to select “EX”. Exponential can adjust
aileron, throttle and rudder sensitivity as the stick at the middle.
5. Set curve point (normal/advanced)
The box under “EX” shows the curve points.
Select “Curve setting” in More setting function list.
Please refer to
Page 27 for detail curve setting.
6. Press EXIT after all the values are finished setting.
Servo
Switch
Dual rate
Exponential
Curve point
Curve picture
(please refer to Page 27)
INSTRUCTION
GLIDER
133