User's Manual

7. AUXILIARY CHANNELS SETTING
This function is for channel 5 to channel 9 function setting.
Setting Method:
Use up or down button to select AUXILIARY CHANNELS
SETTING, OK button is to enter editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to set the switches or knobs. The switches can
be set from A to F, the knobs can be set
as VA, VB, VC, VL,
VR or none(-).
3. Use left or right direction button to set normal or reverse
direction of every channel.
4. Press EXIT after setting.
Channel
Switch
Direction
INSTRUCTION
GLIDER
138