User's Manual

This function is to set the central, high and low point of four sticks

when users changed the mode I or II by themselves.

Setting Method:

Press Menu and turn on the transmitter to enter “SYS SETTING”

Use up/down button to select “ADJUSTMENT”, OK button is

to enter editing.

Steps:

1. Use direction

button to select the editing part. Ta ke the aileron

adjustment for example

2. Make the stick in the mid-point location. Press OK button

to select any stick you want to adjust.

3. Select into the Figure 2, when the "center" highlights, press the "ok"

button directly (the mid-point has been adjusted), then enter the high

adjust.

4.The "high” highlights, take the stick gently

in the right side

(throttle /elevator in the top, aileron / rudder in the right),press "ok"

button ( the max adjust is OK), enter the low adjustment.

5.The "low" highlights, take the stick gently in the left side (throttle

/elevator in the bottom, aileron / rudder in the left),press "ok"

button

(the min adjust is OK).

6. Press OK or RESET to confirm the record or reset.

7. If the record is wrong, press OK will back to step 3.

9.Adjustment

INSTRUCTION

HELICOPTER