User's Manual

25
Electronic Gearbox
When installing the cooling plate, please do not contact the aluminum or carbon alloy chassis and
other easily conductive material
Brush Motor Disturbance Countermeasures
Use the brush motor please make sure to install the container of the eliminating the noise
interference.
Other Interfering Countermeasures
When installing the part of the car body .do not contact the metal parts for vehicle body vibration.
Under the situation without installing the filter capacitance or the wrong link of capacitance , the
receiver may affected by the motor generates of
Electromagnetic interference, produce the wrong operation. So please be sure to welding three
filtering capacitors in the motor.
In addition, if use the electronic tuning of schottky diode, please make the anode (cathode)
welded on the positive terminal (+ end),
And the other end is welded on the negative end (end).when Welding the positive and negative
of the motor must be consistent with the actual input power line,
Or it will cause the electrically adjustable or the damage of diode
1
2
3
Schottky diode
Terms Of Use
Warning