User's Manual

43
A.B.S
Make the model car to generate intermittent braking action, namely point type brake.
Trigger point:
A.B.S trigger position action.
0 as long as the brake it will generate A.B.S action.
50 The brake reached 50% produce A.B.S action.
98 brake reached 100% produce A.B.S action.
Returns:
the return of the brake. When Removing the brake action,
the corresponding actuator position of the return ratio.
0 returns ratio is 0, which does not return, no A.B.S function,
become a common brake.
50 return 50%.
100 to return to the position of neutral point.
Delay:
delay start up A.B.S. When meet the A.B.S onset conditions,
delay in starting the function.
0 without delay.
50 delay of about 0.5s to start A.B.S.
100 delay of about 1s start A.B.S.
Circulation:
point velocity. Brake and release the brake will require for a time cycle.
The set value is small, put less time on it;
conversely, the set value is larger, spend more time on it.
Duty:
point efficiency. Brake time accounted for the entire point time proportion.
Low, brake time accounted for the entire point time of 25% .
Mid, braking time to put 50% of the time.
High, brake time accounted for the entire point time 75%.
No configuration
A.B.S
A.B.S
is configured
trigger
operation direction
A Cycle
Brake returns
Brake amountBrake amount
Trigger
point
X: Braking Y: Brake Gap
X:Y Duty Cycle
A.B.S Diagram
Set: Main Menu → ADVANCE → A.B.S
The application of A.B.S:
1,The A.B.S. MODE is set to ON, the function can take effect.
2,When this function is set to switch control, set the A.B.S . MODE to ON,
And then it is controlled by the switch whether the function will take effect or not.
The specific operation can be seen in the function selection.
Function Description