CONTENTS Important Safety Instructions 2 Safety Information 3 Preparation What's Included Front View Rear View Installing the Stand Removing the Stand for Wall-Mounting Remote Control 4 4 5 6 7 7 8 Connecting External Devices 9 Customizing TV Settings Initial Setup Navigating the Setup Settings Streaming Media Viewing Photos Listening to Music Source Setup Settings Audio Picture Channel Time Network Lock 10 10 11 12 13 13 14 14 15 15 16 17 18 18 19 21 Parental Control 22 Troubleshooting 24 Ma
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATION What's Included TV Set Remote Control with Batteries 845-058-03B04 TV Stand Four Screws User Manual Quick Start Guide User Manual Quick Start Guide 154-001-YM42 154-002-YM42 002-KBB-SEIKI 4 TP4X14A-HO 002-LEH-SEIKI
PREPARATION Front View 1. POWER Switch the TV between On/Standby mode. 2. SOURCE Press to select among different input signal sources. 3. MENU Display the OSD (on screen display) menu. 4. CH / Press to select a channel. 5. VOL +/Press to adjust the volume. 6. POWER Indicator Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode. 7. IR (Infrared Receiver) Receive IR signals from the remote control.
PREPARATION HDMI 3 10 Rear View HDMI 2 HDMI 1 1. Power Cord Connect to AC power outlet. 2. Headphone Socket Connect to the Headphones. 3. USB Port Connect to a USB storage device to play compatible audio and photo files. 4. LAN Network connection port. 5. HDMI Inputs Connect to a High-Definition (HD) signal output device. 6. VGA Input Connect to a computer or other devices with a VGA interface. 6 7. PC AUDIO Input Connect to a computer audio output. 8.
PREPARATION Installing the Stand • 1. Lay the TV face down on a flat, cushioned surface to avoid damages and scratches. • 2. Fix one stand to the TV using the 2 screws provided. • 3. Fix the other stand to the TV using the 2 screws provided. Removing the Stand for Wall-Mounting • 1.Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. • 2.Untighten the 4 pcs screws holding the stand assembly and remove them. • 3.
PREPARATION Remote Control INFO 33 8 1. :Switch the TV between On and Standby mode. 2.MUTE:Mute and restore TV sound. 3.0~9:Select a program.(ATV/DTV mode) 4.—:Enter multiple program channel numbers such as 2-1. 5. :Return to the previous viewing channel. 6.APP:Press to select the desired APP. 7.MENU:Display the main menu. 8.SOURCE:Select among the different input signal sources:TV/AV/Component/HDMI1/ HDMI2/HDMI3/VGA. :Allows you to navigate the on9.
CONNECTING EXTERNAL DEVICES Blu-ray Player / Recorder Game Console Satellite Video Camera Antenna Cable OR Digital Audio System Satellite Receiver VCR Optical Cable (sold separately) Component Cable (sold separately) HDMI 3 AV Cable (sold separately) RF Cable (sold separately) HDMI 2 Audio Cable (sold separately) HDMI 1 VGA Cable 3.
CUSTOMIZING TV SETTINGS Initial Setup • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. • In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. • The first time you turn the TV on, it will go into the Setup Wizard. Press buttons to select your desired mode and press OK to confirm.
CUSTOMIZING TV SETTINGS 7 8 MENU :Exit 9 • If channels can not be found, this frame will be displayed automatically. Navigating the Setup Settings • Press the MENU button to display the main menu. • Use buttons to select SETUP menu and then press navigate and select the available menu.
CUSTOMIZING TV SETTINGS STREAMING • Press the MENU button on the main unit or on the remote control to display the STREAMING. Then press buttons to select the desired APP and press OK button to view what you want. Or press the hotkey on the remote control to enter the APP directly. Note:After the TV connects to network, the status Unconnected will alter to Connected. NETFLIX YouTube VUDU Toon goggles Pandora AccuWeather 12 Enjoy TV shows and movies streamed instantly over the Internet.
CUSTOMIZING TV SETTINGS MEDIA NOTE:Portable storage devices( USB disk or Hard disk) should be inserted. • Press the MENU button on the main unit or on the remote control, and then press buttons to select the MEDIA, and then press OK button to enter. Viewing Photos MEDIA Device Found: 1 Return PHOTOS WMAW MV WMEW MN WMTW MY MB WMC MUSIC WMDW Device: 1 Directories:10 WMU Files:0 Total:10 1/1 • After entering MEDIA, press buttons to select PHOTOS and then select the disk type to enter.
CUSTOMIZING TV SETTINGS Listening to Music MEDIA Device Found: 1 Return PHOTOS WMAW MV WMEW MN WMTW MY MB WMC MUSIC WMDW Device: 1 Directories:10 WMU Files:0 Total:10 1/1 MEDIA Crazy in love.mp3 Vol.7 Status: Play 00 01 14 00 04 16 • After entering MEDIA, press buttons to select MUSIC and then select the / buttons to navigate in the music folder disk type to enter. Then use and then press OK button to enter. Note: File format supported: MP3.
CUSTOMIZING TV SETTINGS SETUP • Press the MENU button on the main unit or on the remote control to display the buttons to select SETUP menu and press main interface. Then press buttons to select the desired option. SETTINGS • Press buttons to select SETTINGS menu and then press OK button to enter. Press buttons to select the following setting options and then press buttons to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Advanced Closed Caption DLC Restore Default Adjust advanced option’s setting:H-POS, V-POS, Clock, Phase or Auto. (VGA source mode only) CC Mode Select CC mode:On, Off or CC on Mute. Basic Basic Selection: CC1, CC2, CC3, CC4, Selection Text1, Text2, Text3, Text4. Advanced Advanced Selection: Service1, Service2, Selection Service3, Service4, Service5, and Service6.
CUSTOMIZING TV SETTINGS PICTURE buttons to select PICTURE menu and then press OK button to enter. • Press Press buttons to select the following picture options and then press buttons to adjust each option’s setting. Picture Mode Blue Screen Brightness Contrast Color Sharpness Tint Color Temp. Cycle among picture mode: Dynamic/Movie/Energy Saving/User/Standard. Alternative: you may press the P.MODE button to select the picture mode directly.
COSTOMIZING TV SETTINGS CHANNEL buttons to select CHANNEL menu and then press OK button to enter. • Press Press buttons to select the following channel options and then press buttons to adjust each option’s setting. Air/Cable Auto Scan Favorite Show/Hide Channel Number Channel Label Signal Information Select antenna between Air and Cable. First, select your cable system from Auto/STD/IRC/HRC. Next, select the Auto Scan feature to scan your available cable channels.
COSTOMIZING TV SETTINGS Sleep Timer Time Zone Daylight Saving Time Select a period of time after which the TV automatically switches to standby mode: Off/5/10/…/180/240 min. Alternative: You may press the SLEEP button repeatedly to select the number of minutes directly. Select a Time Zone: Hawaii/ Alaska/ Pacific/ Mountain/ Central/ Eastern/ Atlantic/ Newfoundland. Select to turn On/Off daylight saving time. NETWORK buttons to select NETWORK menu and then press OK button to • Press enter.
COSTOMIZING TV SETTINGS • If there is a new software, a menu screen will pop up reminding that it may lose the current settings if starts the upgrade. Press Yes to enter. • Then a menu bar will remind that the upgrade is fully automatic, and will start after one minute later, please do not turn off the power during the upgrading. Reminder for internet connection: • Below occasions are possible while your internet is connected to enjoy your OTT services. • 1.
COSTOMIZING TV SETTINGS LOCK • Press buttons to select LOCK menu and then press OK button to enter. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. • Press buttons to select the following lock options and then press buttons to adjust each option’s setting. Note: the default password is “0000”. Change Password System Lock USA Canada RRT Setting Reset RRT Clear Lock Use 0-9 buttons to input the old password and then input the new 4-digit password.
PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV.
PARENTAL CONTROL • Motion Picture Association of America (MPAA) Rating System G PG Grade General Audiences Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond • The TV may freeze up during use. Disconnect the power when pressing any cord from the power socket for a few minutes.
TROUBLESHOOTING The audio function does not work • Press the VOL +/- buttons. • Sound muted? Press the MUTE button. Picture OK but no sound • Try another channel. The problem may be caused by the broadcaster. No output from one of the • Adjust the Balance settings in the AUDIO menu. speakers • A change in ambient humidity or temperature may result in Unusual sound from an unusual noise when the TV is switched on or off and does inside the TV not indicate a fault with the TV.
SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HDMI Support Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Brightness (Centre Typ.) Cd/M² Response Time (G To G) Lamp Life (Typ. Hours) Horizontal Viewing Angle (At CR>10) Vertical Viewing Angle (At CR>10) Wall-mount(LxW-mm) 50 inch diagonally LED TFT 60 Hz 1080P Up to 1080P 1920 x 1080 16:9 3500~5000:1 200 8.
SEIKI TV’s LIMITED WARRANTY TO ORIGINAL CONSUMER This Product (including any accessories included in the original packaging) as supplied and distributed in new condition, is warranted by SEIKI LLC (SEIKI or the Warrantor) to the original consumer purchaser against defects in material and workmanship (“Warranty”) as follows: 1. 2.
OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. • Netflix You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https://contactus.netflix.com/help for alternative contact information. • YouTube You can browse the following website for more help: https://productforums.google.
