User's Manual

9
Use the UP and DOWN arrows
on your remote control or TV
keypad to select your local time
zone.
Welcome to the Element TV
Setup Wizard.
Follow this guide to help setup
your TV to scan channels or
access your external devices
like your Antenna,Set-Top Box,
Blu-ray,DVD,Gaming systems
or other devices.
Use the UP and DOWN arrows on
your remote control or TV
keypad to select the language
of the on screen menu.
Turning On/Off Your TV
CUSTOMIZING TV SETTINGS
• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
• In Standby Mode, press the button on the main unit or on the remote control to
turn the TV on. The red LED indicator will turn blue.
The POWER button on the main unit or on the remote control can only
switch the TV into standby. To completely turn off the TV, please disconnect
the power cord from the power socket.
Initial Setup
• ThersttimeyouturntheTVon,itwillgointo
the Setup Wizard. Press the Arrow buttons
to highlight and select your desired mode and
press OKtoconrm.
End-User License Agreement
Decline
Accept
I have read the user agreement
1.NING The user must accept full resonsibility
for any use of the connected device and/or
connected services received through the device.
2.The device may only be used for private,
non-commercial use. The user may not (and
maynotpermitanypersonto):
a.use the connected services or any content for
public or commercial use, for example,by