User's Manual

19
NOT CONNECT
PICTURE MODE
Cycleamongpicturemodes:
Dynamic/Standard/Movie/User.
Alternative:PressP.MODEbuttonon
remotecontroltosetthepicturemode
directly.
BRIGHTNESS
Increaseordecreasetheamountof
whiteinthepicture.
CONTRAST
Adjustthedifferencebetweenlight
anddarklevelsinthepictures.
COLOR Controlthecolorintensity.
SHARPNESS
Adjustcrispnesslevelinedges
betweenlightanddarkareasofthe
picture.
TINT
Adjust the balance between red and
green levels.
COLOR
TEMPERATURE
Cycle among color temperatures:
Normal/Warm/COOL.
ADVANCED
OPTION
Set the following options:
Noise Reduction: Reduce the noise
level of the connected device: OFF/
WEAK/MEDIUM/STRONG.
White Balance: To set the different
options of white balance.
R-GAIN/G-GAIN/B-GAIN/R-OFFSET/
G-OFFSET/B-OFFSET.
Backlight: To set the value of
backlight.
OPEN HDR
Cycle among picture modes:
OFF/AUTO/LOW/MIDDLE/HIGH.
CUSTOMIZING TV SETTINGS
Audio Settings
SOUND MODE
Allowtheselectionofanaudio-
enhancementtechnique:Standard/
Music/Movie/User.
BASS
Controltherelativeintensityoflower-
pitchedsounds.
TREBLE
Controltherelativeintensityofhigher-
pitchedsounds.
BALANCE
Adjust the relative volume of the
speaker in a multiple speaker system.
DIGITAL AUDIO
OUTPUT
Select the digital audio output mode
between PCM/RAW.
SURROUND
SOUND
Turn On/Off to provide an enhanced
listening experience.
AUTO VOLUME
Turn On/Off to automatically control
volume levels.
AUDIO
LANGUAGE
Select audio language among: English,
French, Spanish.
• Press MENU to display the main interface, then
use the Arrow buttons to highlight TV Settings
and press OKtoconrm.UsetheArrow buttons
to cycle among different options and select Audio
to enter and adjust each option setting.
NETWORK
TYPE
Select Wired and Wireless network,
then connect the TV to the wired
network or search the wireless network
throughsearchingavailableWi.
MY NETWORK
Display the current network which you
connect to.
IP ADDRESS
Display the current IP information.
• Press MENU to display the main interface, use
the Arrow buttons to highlight TV SETTINGS and
pressOKtoconrm.ThenUsetheArrowbuttons
to select NETWORK to enter and adjust each
option setting.
Network Settings
OFF
AUTO VOLUME