ELSFS422 42" FHD Digital LED TV INSTRUCTION MANUAL Please read all the instructions carefully before using this TV, and keep the manual for future reference.
CONTENTS CONTENTS Important Safety Instructions 2 Additional Safety Information 3 Preparations What's Included Front View Rear View Wall Mounting Remote Control 4 4 5 6 6 7 Connecting External Devices 8 Customizing TV Settings Turning On/Off Your TV Setup Wizard Navigating The On-screen Display Streaming Media Viewing Photos Listening To Music Selecting The Input Source Channel Selection Volume Adjustment Setup Settings Audio Settings Picture Settings Channel Settings Time Settings Network Settings
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
ADDITIONAL SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATIONS What is Included? TV Set Remote Control with Batteries ELSFS422 Element LCD TV’s LIMITED WARRANTY TO ORIGINAL CONSUMER LCD TV (CCFL or LED Backlight) – 42 inches and above Screen Size Models (the “Product”) 42" FHD Digital LED TV This Product (including any accessories included in the original packaging) as supplied and distributed in new condition, is warranted by Element Electronics Corp.
PREPARATIONS Front View LED IR • Switch the TV between On / Standby mode. • SOURCE Press to select among different input signal sources. • MENU Display the OSD (on screen display) menu. • CH Press to select a channel. • VOL +/Press to adjust the volume. • LED The LED light indicates when the TV is activated.
PREPARATIONS Rear View 1. Headphone output Connect to the Headphones. 2. USB Input Connect to a USB storage device to playcompatible audio and photo files. 3. LAN Network connection port. 4. HDMI Inputs Connect to a High-Definition (HD) signal input device. 5. VGA Input Connect to a computer or other devices with a VGA interface. 6. PC Audio Input Connect to a computer audio output. 7. Antenna Input (75Ω VHF/UHF) Connect to the antenna (75Ω VHF/UHF) socket with the RF coaxial cable. 8.
PREPARATIONS Remote Control 7
CONNECTING EXTERNAL DEVICES Blu-ray Player / Recorder Game Console Satellite Video Camera Antenna Cable Digital Audio System Satellite Receiver VCR Composite/Component Cable (not included) Audio Cable (not included) AV IN/COMPONENT OR RF Cable(not included) VGACable Audio Cable (not included) (not included) Cable (not included) Network Cable (not included) Headphones Computer HDMI Cable(not included) WIFI 8 HDMI Device Optical Cable (not included)
CUSTOMIZING TV SETTINGS Turning On/Off Your TV • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. • In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. The POWER button on the main unit or on the remote control can only switch the TV into standby.
CUSTOMIZING TV SETTINGS Setup Wizard • Press Yes to confirm. Note: If you want change the modes between Home Mode(Energy Saving) and Retail Mode, you can change the setting in the Setup Menu under Display Mode. • Pres s t he buttons to select your desired mode and press OK button to confirm. . . . • Press the buttons to select your desired mode and press OK button to confirm. Menu Language Air/Cable Cable Auto Scan 10 Select your desired language to be displayed on the menu.
CUSTOMIZING TV SETTINGS Navigating The On-screen Display • Press the MENU button to display the main menu. • Press the buttons to navigate and select the available menus.
CUSTOMIZING TV SETTINGS Streaming • Press the MENU button on the main unit or on the remote control to display the STREAMING. Then press buttons to select the desired APP and press OK button to view what you want. Or press the hotkey on the remote control to enter the APP directly. Note:After the TV connects to network, the status Unconnected will alter to Connected. NETFLIX YouTube VUDU Toongoggles Pandora AccuWeather 12 Enjoys TV shows & movies streamed instantly over the Internet.
CUSTOMIZING TV SETTINGS Media NOTE:Portable storage devices( USB disk or Hard disk) should be inserted. • Press the MENU button on the main unit or on the remote control and then press buttons to select the MEDIA, and then press OK button to enter. Viewing Photos MEDIA Return WMDW WMAW MN Device : 1 • After entering MEDIA, press disk type to enter. Then use and then press OK button enter.
CUSTOMIZING TV SETTINGS Listening To Music • After entering MEDIA, press disk type to enter. Then use and then press OK button enter. buttons to select MUSIC and then select the / buttons to navigate in the music folder Note: File format supported: MP3.
CUSTOMIZING TV SETTINGS Selecting The Input Source • Press the SOURCE button on the main unit or on the remote control to display the Input Source list. • Press the buttons to select your desired input source among: TV/AV/ Component/HDMI1/HDMI2/HDMI3/VGA and then press OK button to confirm. Channel Selection • Press the CH /CH buttons on the main unit or on the remote control repeatedly to select the channel. • Press the 0-9 buttons on the remote control to select the channel directly.
CUSTOMIZING TV SETTINGS Setup • Press the MENU button on the main unit or on the remote control to display the main interface. Then press buttons to select SETUP menu and press button to select the desired option. Settings • Press buttons to select SETTINGS menu and then press OK button to enter. Press buttons to select the following setting options and then press buttons to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Advanced Closed Caption DLC Restore Default Adjust advanced option’s setting: H-POS, V-POS, Clock, Phase or Auto. (VGA source mode only) CC Mode Select CC mode : On, Off or CC on Mute. Basic Basic Selection: CC1, CC2, CC3, CC4, Selection Text1, Text2, Text3, Text4. Advanced Selection: Service1, Service2, Advanced Service3, Service4, Service5, and Selection Service6.
CUSTOMIZING TV SETTINGS Picture Settings • Press the MENU button on the main unit or on the remote control then press the buttons to select PICTURE menu and then press the or the OK button to enter. • Press the buttons to select the following picture options and then press the buttons to adjust each option’s setting. Picture Mode Blue Screen Brightness Contrast Color Sharpness Tint Color Temp. 18 Cycle among picture mode: Dynamic/Movie/Energy Saving/User/Standard. Alternative: you may press the P.
CUSTOMIZING TV SETTINGS Channel Settings • Press the MENU button on the main unit or on the remote control and then press the buttons to select CHANNEL menu. • Press buttons to select the following channel options and then press the buttons to adjust each option’s setting. Air/Cable Auto Scan Favorite Show/Hide Channel Name Label Signal Information Select antenna between Air and Cable. First, select your cable system from Auto/STD/IRC/HRC.
CUSTOMIZING TV SETTINGS Network Settings • Press buttons to select NETWORK menu and then press OK button to enter. • Press buttons to select the following network options and then press buttons to adjust each option’s setting. Select two types of network: Wireless or Lan. Connect the TV to the wired Lan: Auto Get IP/Manual Lan Get IP. Connect the TV to the wireless network through Wireless searching the available Wifi. IP Address Display the current IP information.
CUSTOMIZING TV SETTINGS • If there is a new version, it will be downloaded in the background. When you want to enter the app, a menu bar will pop up reminding you that upgrade software is downloading. Please try later... • After the download completed, it can upgrade automatically after users press the standby button. Note: This procedure is fully automatic, and remember not to cut off the power.
CUSTOMIZING TV SETTINGS Lock Settings • Press the MENU button on the main unit or on the remote control and then press the buttons to select LOCK menu. • Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. • Press the buttons to select the following options and then press the buttons to adjust each option’s setting. The default password is "0000".
CUSTOMIZING TV SETTINGS Parental Control Press the MENU button on the main unit or on the remote control and then press the buttons to select LOCK menu. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV.
CUSTOMIZING TV SETTINGS Motion Picture Association of America (MPAA) Rating System Grade General Audiences Parental Guidance Suggested G PG PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support (Refer to Warraty page). SYMPTOM POSSIBLE CAUSE Dead. No LED lit No power to the TV. Dead. No LED lit red Set in standby mode. Blue screen No signal. Incorrect source selected.
TROUBLESHOOTING Before contacting the service technician, perform the following simple checks. If any problem still persists, unplug the LED TV and call for assistance. PROBLEM POSSIBLE SOLUTIONS • Check that the main plug has been connected to a wall outlet. • Check that you have pressed the POWER on the No sound and picture front of the TV set. • Check the picture contrast and the brightness setting. • Set in standby mode.
TROUBLESHOOTING Note: When there is a problem in VGA mode ( only when VGA mode is applied). PROBLEM The signal is out of range Ve r ti c a l b a r o r s t r i p o n t h e background, horizontal noise and incorrect position Screen color is unstable or is a single color POSSIBLE SOLUTIONS • Adjust resolution, horizontal or vertical frequency. • Check whether the signal cable is connected or loose. • Check the input source. • Set the auto configure or adjust clock, phase, or H/V position.
FCC NOTES FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
OTT APP SERVICE OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. • Netflix You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https://contactus.netflix.com/help for alternative contact information. • YouTube You can browse the following website for more help: https://productforums.google.
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.