User's Manual

10
En
-
• Connect the power cord to the power socket
after you have completed all the physical
connections. At this stage, the TV will enter
Standby Mode and the red LED indicator will
illuminate.
• In Standby Mode, press the
button on the
main unit or on the remote control to turn the
TV on. The red LED indicator will turn blue.
• ThersttimeyouturntheTVon,itwillgointo
the Setup Wizard. Press the Arrow buttons
to highlight and select your desired mode and
press OKtoconrm.
CUSTOMIZING TV SETTINGS
Initial Setup
Home Mode :The picture mode will be Standard if you
select this mode.
Retail Mode:Select Dynamic Mode if you would like
your picture to be brighter. At times this mode may use
more energy to operate the Volume/Sound Mode and
Picture Mode.
The SLEEP-MODE power consumption should be less
than 0.5W.
• Follow the next screens. Use the arrow keys on
the remote control and then press OK button to
customize your TV channel conguration.
• After the channel scan, your TV channels will be set
up.