User's Manual

Page 20 of 29
own pulse. Other digital
signals which is lower than
1280 x 1024 can be
adjusted. Analog signals
can be adjusted in all
supported resolution.
Negative figure is adjusted
to get softer image and
positive figure is adjusted
to get sharper image.
The user should
individually adjust the
filter depending on
the application.
Input
Source
DVI-D
DP
VGA
Select the active input
source priority.
If you call this OSD menu,
the current source is
displayed. If current source
is inactive (NO sync) and,
it will auto search other
port.
Auto-Color ON / OFF Automatically get input
signal match with the
monitor
Auto-Configure ON / OFF Automatically adjust the
image display settings.
Auto Adjust
(Analog only)
Execute The selected auto
functions are executed.
Note: The quality of the
function depends on the
applied picture contents.
To get better effect it is
recommended to apply full
screen picture and
including white and dark
contents.
Horizontal
position
0 … 255 Adjustment of OSD
horizontal position
Vertical position 0 … 255 Adjustment of OSD
vertical position
Background 0 … 12 Select the OSD
background transparency
LED ON/OFF Setting the status of the
operation LED.
OSD Settings
Language English Use the "Language" menu