Ai Box3.
Ai Box3.0 S User Manual catalogue Safety Information ....................................................................................................................................................................2 1. Product introduction ...........................................................................................................................................................4 1.1 Product features...........................................................................................
Ai Box3.0 S User Manual Safety Information The following marks on the product and in this manual indicate important safety measures. WARNING: Be sure to understand and follow all safety guidelines, safety instructions, warnings and precautions listed in this manual. This product is for professional use only! This product may result in serious injury or death due to fire hazard, electric shock, and crushing hazard.
Ai Box3.0 S User Manual Beware of Fire! • Use a circuit breaker or fuse protection to avoid fire caused by power supply cables overloading. • Maintain good ventilation around the display screen, controller, power supply and other devices, and keep a minimum 0.1 meter gap with other objects. • Do not stick or hang anything on the screen.
Ai Box3.0 S User Manual • Do not modify the product, do not add or remove parts. • Do not use the product in case ambient temperature is over 55 ℃. Beware of Injury! • Warning: Wear a helmet to avoid injury. • Ensure any structures used to support, fix and connect the equipment can withstand at least 10 times the weight of all the equipment. • When stacking products, please hold products firmly to prevent tipping or falling. • Ensure all components and steel frames are securely installed.
Ai Box3.0 S User Manual 1. Product introduction Absenicon3.0 series standard conference screen is an LED intelligent conference terminal product developed by Absen, which integrates document display, high-definition display and video conference application, and can meet the multi-scene requirements of enterprise high-end conference rooms, lecture halls, lecture room , exhibitions and so on. Absenicon3.
Ai Box3.0 S User Manual 1.1 Product features 1. The front of the screen adopts an integrated minimalist design, and the ultra-high percentage of display area for 94%. The front of the screen has no redundant design except for the switch button and the commonly used USB*2 interface. The giant screen interacts, breaking the space boundary, and immersing the experience； 2.
Ai Box3.0 S User Manual other operations, one hand can control various functions; 16.All kinds of interfaces are available, and peripheral devices can access； 17.
Ai Box3.0 S User Manual 1.2 Product specification 项目 型号 Ai Box3.0 S Product size (Inch) 138 Display area（mm） 3050*1715 Screen size（mm） 3060*1830*28.5 Pixel Per Panel（Dots) 1920x1080 Brightness（nit） 350nit Contrast Ratio 5000:1 colour space NTSC 110% power supply AC 100-240V average power consumption(w) 500 Maximum power consumption(w) 1500 Android system Android8.0 System configuration 1.
Ai Box3.0 S User Manual 1.
Ai Box3.0 S User Manual 1.4 standard packaging The product packaging of the all-in-one machine is mainly composed of 4 parts: cabinet packaging (1*5 modular packaging), module packaging, installation structure packaging (movable bracket or wall-mounted), edging installation. Cabinet packaging: honeycomb carton 1870*760*500; Module packaging: honeycomb carton 950*810*680; edging packaging: honeycomb carton 1950x440x380; mobile bracket packaging: honeycomb carton 2010*870*400.
Ai Box3.0 S User Manual 2. Product Installation This product can realize wall-mounted installation and movable bracket installation. 2.1 Installation guide This product is calibrated by the whole machine. In order to ensure the best display effect, it is recommended to install it according to the identification sequence number of our company.
Ai Box3.0 S User Manual The side of the beam with screw holes is facing up 横梁 vertical beam The vertical beam has a gap on the side facing inward 2.2.2 Install support legs (1) Confirm the the front and back of the support leg and height of the bottom of the screen from the ground. Note: There are 3 heights to choose for the height of the bottom of the screen surface from the ground: 800mm, 880mm and 960mm, corresponding to different installation holes of the vertical beam.
Ai Box3.0 S User Manual (2) The front of the frame is in the same direction as the front of the support leg, and a total of 6 M8 screws on both sides are installed. 2.2.3 Install cabinet Hang the middle row of cabinet first, and hook connecting plate on the back of the cabinet into the notch of the cross beam of the frame.
Ai Box3.0 S User Manual Cabinet M4 safety screws Hook connecting plate cross beam Note: The internal structure is subject to the actual product. (2) Hang the cabinets on the left and right sides in turn, and lock the left and right connecting bolts on the cabinet. The four-corner hook connecting plate of the screen are flat connecting plate. Left and right connecting bolts Note: The internal structure is subject to the actual product. 2.2.
Ai Box3.0 S User Manual (2) Fix the lower edging to the bottom row of cabinets, tighten 6 M6 screws, and connect the power and signal wires of the lower edging and the bottom cabinet; Note: The internal structure is subject to the actual product. (3) Install the left, right and top edging using M3 flat head screws; Note: The internal structure is subject to the actual product.
Ai Box3.0 S User Manual 2.2.5 Install module Install the modules in order of number.
Ai Box3.0 S User Manual 2.3 Installation method of wall-mounted 2.3.1 Assemble frame Take out the frame from the packing box, including the cross beam and vertical beam. Place it on the ground with the front facing upwards (the side with the silk-printed logo on the beam is the front); Assemble the four sides of the frame, including two beams, two vertical beams and 8 M8 screws. The side of the beam with screw holes is facing up 横梁 vertical beam The vertical beam has a gap on the side facing inward 2.
Ai Box3.
Ai Box3.0 S User Manual (2) After confirming the installation position of the frame fixed connecting plate and the position of the screen, Holes in the wall to install frame fixed connecting plate (only 4 connecting plate on four sides can be installed when the wall bearing capacity is good); 2.3.3 Fixed the frame After the frame fixed connecting plate is installed, install the frame, fix it with 2 M6*16 screws at each position, and clamp it up and down.
Ai Box3.0 S User Manual 2.2.4 Install cabinet Hang the middle row of cabinet first, and hook connecting plate on the back of the cabinet into the notch of the cross beam of the frame. Move the cabinet to the center and align the marking line on the beam; Hook connecting plate Flat connecting plate (1) Install 4 M4 safety screws after the cabinet is installed; Cabinet M4 safety screws Hook connecting plate cross beam Note: The internal structure is subject to the actual product.
Ai Box3.0 S User Manual (2) Hang the cabinets on the left and right sides in turn, and lock the left and right connecting bolts on the cabinet. The four-corner hook connecting plate of the screen are flat connecting plate. Left and right connecting bolts Note: The internal structure is subject to the actual product. 2.2.
Ai Box3.0 S User Manual Note: The internal structure is subject to the actual product. (3) Install the left, right and top edging using M3 flat head screws; Note: The internal structure is subject to the actual product. 2.2.6 Install module Install the modules in order of number.
Ai Box3.
Ai Box3.0 S User Manual 3. Power on and off Guidance 3.1 Power-on steps Use 100～240V 50/60Hz alternating current as the power supply of Absenicon3.0 conference screen. 1. Turn the power switch at the bottom of the Absenicon3.0 conference screen (next to the power interface) to the "ON" position (the switch button indicator lights up in red); 2. Press the power button on the lower right corner of the Absenicon3.
Ai Box3.0 S User Manual 3.2 Power-off steps When the Absenicon3.0 conference screen is turned on and working normally: Method 1: Press the switch button on the lower right corner of the panel, the screen will display "Shutdown countdown (5S)" and "Press the shutdown button again to cancel" (the switch button status indicator lights up in red); Method 2: Press the power button on the remote control, the screen displays "Standby (5S)" and "Shutdown".
Ai Box3.0 S User Manual Completely power off: Turn the power switch at the bottom of the conference screen (next to the power interface) to the "OFF" position; 3.3 Standby steps When the Absenicon3.0 conference screen is turned on and working normally: Press the power button on the remote control, the screen displays "Standby (5S)" and "Shutdown". After selecting "Standby", it will count down to 5S standby (the switch button status indicator lights up in blue); 4. Description of Remote Control 4.
Ai Box3.0 S User Manual 4.2 Remote control matching guide 4.2.
Ai Box3.0 S User Manual 4.2.2 Method two 1. On the main interface of the conference screen system, select "More Applications" to enter the APP application interface; 2. Click "Settings" to open the menu interface, select "Network-Bluetooth" to enter the Bluetooth settings interface; 3. When the blue indicator light on the top of the remote control flashes, select "Scan Device" in the Bluetooth settings 4. In the device list, select the device name of "Storm Bluetooth Remote Control" and perform matching.
Ai Box3.
Ai Box3.
Ai Box3.0 S User Manual Step 4: Customize the device name to be conveniently searched by other devices; Step 5: The wireless display adapter is matched.
Ai Box3.0 S User Manual After the initial settings are completed, you can view the novice guide or directly start using the Absenicon conference screen system.
Ai Box3.0 S User Manual 6. Novice Guide 6.1 Remote control guide 6.2 Wireless display adapter guide 6.
Ai Box3.0 S User Manual 6.4 Software display guide 7. Display Guide 7.1 Wireless display 7.1.1 Wireless display by adapter Foreign customers recommend purchasing Barco's “Click Share”as wireless display adapter. For specific steps, please refer to Barco's equipment operating instructions.
Ai Box3.0 S User Manual 7.1.2 PC display Use the PC open the browser, enter "https://www.absen.com/absenicon/", and download the correspo nding client according to different operating platforms. 7.1.2.
Ai Box3.0 S User Manual 7.1.2.2 MAC OS system display (1) Use screen mirroring directly. (2) Connect to the Absenicon conference screen hotspot on the PC (the default name is: (3) Click the "Screen mirroring" icon in the upper right corner and select the corresponding device Absenicon_XXXX, and the default password is: 12345678); name to complete the screen display; 7.1.3 Mobile phone display 7.1.3.
Ai Box3.0 S User Manual 7.1.3.2 Transcreen of android features 1. Steps to connect the conference screen (1) Open the Transcreen software, the first page of the screen is as follows, indicating that it is not connected to an authorized device; (2) Open the phone "Settings" to connect to the conference screen wifi, enter Transcreen and click "Connect Device" to select the conference screen to be connected; 2.
Ai Box3.0 S User Manual 1. Photos Display / Audio and Video Display/Files Display Click " Photos Display" to upload the stored photos in the phone to the conference screen; Click "Video Display" to upload the stored video and audio in the phone to the conference screen; Click "Submit File" to upload the stored files in the phone to the conference screen; 2.
Ai Box3.0 S User Manual 4.Wireless Screenshot Support wireless screenshot function, listeners can take a complete screenshot of the content of the speaker through the mobile phone, and transfer it back to their mobile phone and store it in a designated location.
Ai Box3.0 S User Manual 7.1.3.3 IOS system display (1) Use iphone to connect to the Absenicon conference screen hotspot (the default name is: Absenicon_XXXX, and the default password is: 12345678); (2) Slide from top of the screen to open the control center; (3) Click "Screen Mirroring" and select Absenicon_XXXX to complete the mobile phone screen projection; 7.1.3.4 Transcreen of iphone features 1.
Ai Box3.0 S User Manual (2) Open the phone "Settings" to connect to the conference screen wifi, enter Transcreen and click "Connect Device" to select the conference screen to be connected; 2.
Ai Box3.0 S User Manual 3. Photos Display / Audio and Video Display/Files Display Click " Photos Display" to upload the stored photos in the phone to the conference screen; Click "Video Display" to upload the stored video and audio in the phone to the conference screen; Click "Submit File" to upload the stored files in the phone to the conference screen; 4.
Ai Box3.0 S User Manual 5. Wireless Screenshot Support wireless screenshot function, listeners can take a complete screenshot of the content of the speaker through the mobile phone, and transfer it back to their mobile phone and store it in a designated location. 7.1.4 Multi-split display The Absenicon conference system supports multi-split display function, which can set multi-split screen freely, and supports up to four screens. Users can follow the steps below to set up multi-split display .
Ai Box3.
Ai Box3.
Ai Box3.0 S User Manual iOS system devices can only click "Screen Mirroring" on the client to complete screen sharing. In multi-split screen mode, only one split screen can play sound, but each split screen can independently switch the sound. Split screens can exchange positions with each other, and double-click to display in full screen. 7.1.
Ai Box3.0 S User Manual 7.1.6 Connection code setting On the wireless display guide interface, press the confirm key on the remote control or select the icon in the upper right corner of the interface, and slide in the pop-up menu to select "Connection code setting".
Ai Box3.0 S User Manual 7.2 Signal source access Connect one end of the HDMI cable to the HDMI port of the Absenicon conference screen and the other end to the PC. 8. Signal Source Switching Users can switch between multiple signal sources in the following 3 ways. 8.1 Presentation On the main interface of the conference screen system, click "Presentation" to enter the presentation interface.
Ai Box3.0 S User Manual (1) Click "Source", the source switching interface will pop up at the bottom of the screen; (2) Select the source that needs to be displayed and press the confirm button on the remote control to switch successfully. 8.3 Remote Control Signal Source Switching (1) Short press the "source switch" button on the remote control, the source switch interface will pop up at the bottom of the screen; (please refer to 5.
Ai Box3.0 S User Manual 9. Display Effect Settings If you need to adjust the display effect to obtain a more comfortable viewing effect, you can do the following operations. 9.1 Scene mode Absenicon conference screens are specially designed for different meeting application scenarios, providing 4 scene modes, whether it is document presentation, video playback, or remote meeting, it can match the best display effect. (1) Standard mode: The default mode, which can cover most usage scenarios.
Ai Box3.0 S User Manual 2. Click "Effect Adjustment" to enter the effect adjustment interface; 3. Choose the corresponding mode according to your actual needs.
Ai Box3.0 S User Manual 9.2 Custom display effect The user can make fine adjustments after selecting the scene mode to meet individual requirements.
Ai Box3.0 S User Manual (2) Click the "eye protection mode" button to turn on/off the effect of eye protection mode Note: When the eye protection mode is turned on, the screen display will be slightly yellow. 10. Settings On the main interface of the conference screen system, select "More Applications" to enter the "Settings" application interface.
Ai Box3.0 S User Manual 10.1 Network settings In the setting interface, select "Network" to enter the "Network Settings" interface. 10.1.
Ai Box3.0 S User Manual Select "Wired Network" to enter the wired network setting interface, and select "Auto" for "Wired Setting" to automatically obtain the IP address. When the icon is displayed in the upper right corner of the main interface, it indicates that the network connection is successful. 10.1.
Ai Box3.0 S User Manual automatically search for surrounding wireless networks, select an available Wi-Fi network, and a password input window will pop up. After entering the password, click "OK" to connect to Wi-Fi. 10.1.
Ai Box3.0 S User Manual Select "Hotspot" to enter the local hotspot setting interface. (1) The hotspot switch is turned on; (2) Set the password of the wireless hotspot, click "OK" to turn on the hotspot; Note: After modifying the hotspot name or password of the machine, you need to connect the wireless display adapter to the USB port of the conference card and re-pair.
Ai Box3.0 S User Manual 10.1.4 Bluetooth Select "Bluetooth" to enter the local hotspot setting interface.
Ai Box3.0 S User Manual (1) Turn on the Bluetooth switch to automatically scan for devices; (2) Select the device to be paired; (3) According to the pop-up "Bluetooth Pairing Request", enter the corresponding number and click "Pair". 10.2 Effect settings In the setting interface, select "Picture" to enter the "Effect Settings" interface. 10.2.
Ai Box3.0 S User Manual 10.2.2 Eye protection mode The bottom button (Eye Comfort) can turn on the eye protection mode.
Ai Box3.0 S User Manual 10.3 Sound settings In the setting interface, select "Sound" to enter the "Sound Settings" interface. Set the sound of the Absenicon conference screen, including adjusting the volume and turning on/off the system sound. 10.4 General settings In the main setting interface, select "General" to enter the "General Settings" interface. There are signal source settings, apps, time and date, language and keyboard, wallpaper, and assistive touch.
Ai Box3.0 S User Manual 10.4.1 Source settings In the main interface of general settings, select "Signal" to enter the signal source settings interface. Perform the following settings and management of the connected signal source. (1) Remember signal: Set the power-on signal source, select "Last Used", "Home" (default), "HDMI1", "HDMI2", "HDMI3" and "Windows".
Ai Box3.0 S User Manual "16:9" and "pixel-to-pixel". 10.4.2 Application management In the main interface of general settings, select "APP" to enter the app settings interface. Perform the following management for the installed APP. (1) Force stop: Force the APP to be stopped.
Ai Box3.0 S User Manual (2) Open app: run the selected APP. (3) Uninstall: uninstall the selected APP. (4) Clear data: Clear the data cache of the selected APP. 10.4.3 Data&Time On the main interface of general settings, select "Time and Date" to enter the time and date setting interface. Set the time and date of the Absenicon conference screen as follows. (1) Automatically obtain network time: Turn on "Set Automatically", the time and date will be synchronized with the network time.
Ai Box3.
Ai Box3.0 S User Manual 10.4.4 Language & keyboard In the main interface of general settings, select "Language and keyboard" to enter the language and keyboard setting interface. Set the language of the Absenicon conference screen and the input method of the keyboard.
Ai Box3.0 S User Manual (1) Language: "Chinese (Simplified)" (default), "English", "Chinese (Traditional)" and "Japanese" can be selected. (2) Keyboard: Optional "Android keyboard (AOSP)", "remote control input method" (default). 10.4.5 Wallpaper In the main interface of general settings, select "Wallpaper" to enter the wallpaper setting interface. Set the desktop wallpaper of the Absenicon conference screen.
Ai Box3.0 S User Manual (1) The system comes with wallpaper: select the target wallpaper and click "set as wallpaper". (2) Custom wallpaper: Click "Custom wallpaper", select the local picture that needs to be set as wallpaper in the ES file browser, and click.
Ai Box3.0 S User Manual 10.4.6 Assistive touch On the main interface of general settings, select "Assisitive Touch" to enter the setting interface. Turn on "Assistive Touch " and click the small icons on both sides of the interface to open the sidebar.
Ai Box3.0 S User Manual : Return key, click to return to the previous step. : Home button, click to return to the main interface. : Paintbrush button, click to open the paintbrush tool. : Whiteboard button, click to open the whiteboard tool. : Menu key, click to open the menu bar. Description: The remote control cannot operate the assistive touch menu, it needs to be connected to a mouse or use the touch screen for control. 10.
Ai Box3.0 S User Manual Set the time for the Absenicon conference screen to switch on and off. Set the startup time and shutdown time of the conference screen respectively.
Ai Box3.0 S User Manual 10.5.2 Reset factory In the main interface of the system settings, select "Factory Reset " to enter the factory settings interface. Click " Factory reset" to restore the Absenicon conference screen to the factory state.
Ai Box3.0 S User Manual Description: The local documents, photos, videos, applications and other data will be cleared after the factory settings are restored and cannot be restored. 10.5.3 Android system update In the main interface of system settings, select "System Update" to enter the Android system update interface.
Ai Box3.0 S User Manual (1) Insert the U disk containing the upgrade package into the USB port of the Android card. (The upgrade package file name is: update.zip, and the upgrade package must be placed in the root catalog of the mobile device). (2) When it displays "the U disk root catalog has the upgrade file and can be upgraded", click "Local Upgrade". (3) During the upgrade process, the Absenicon conference screen will be powered on without plugging and unplugging the U disk.
Ai Box3.0 S User Manual Android card version Sending card version Receiving card version Memory information Storage information The name of the machine can be modified 10.5.
Ai Box3.0 S User Manual In the main interface of system settings, select "Beginner’s guide" to enter the novice guidance interface. See section 7 for details. 10.5.6 Network Port Switch On the main interface of the system settings, select "Network Port Switch".
Ai Box3.0 S User Manual Switch the status of the network port, select "LCT" (default), "wired network". When you need to connect to the host computer through the network port, please switch to the "LCT" state. When you need to connect to the wired network through the network port, please switch to the "wired network" state. 11. ES File Explorer Users can follow the steps below to perform simple operations on files.
Ai Box3.
Ai Box3.0 S User Manual Select the folder where the target file is located, select the target file and confirm to open it. Long press the confirm button on the remote control or the left mouse button to perform operations such as "copy/cut/delete/rename" on the target file. 12．Product Maintenance 12.1 Tool preparation The preparation tools include: a maintenance tool before the module, a Phillips screwdriver, a multimeter, etc.
Ai Box3.0 S User Manual 12.2 Cabinet accessories replacement guide 12.2.1 Module maintenance Press the front module maintenance tool button, get close to the module, suck out the module, and then release the front module maintenance tool button after holding the module with your hand. 12.2.
Ai Box3.0 S User Manual 12.2.3 Receiving card maintenance Receiving card 12.2.
Ai Box3.0 S User Manual 12.3 Maintenance instructions When you cannot determine the cause of the fault or do not understand the method of updating the accessories, please contact Absen! FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
