User's Manual

Ai Box3.0 S User Manual
16
2.3 Installation method of wall-mounted
2.3.1 Assemble frame
Take out the frame from the packing box, including the cross beam and vertical beam. Place it on the
ground with the front facing upwards (the side with the silk-printed logo on the beam is the front);
Assemble the four sides of the frame, including two beams, two vertical beams and 8 M8 screws.
The side of the beam with screw holes is facing up
The vertical beam has a gap on the side facing inward
2.3.2 Install frame fixed connecting plate
(1) Install the frame fixed connecting plate;
Installation spacing of
Frame fixed
connecting
横梁
vertical
beam