User's Manual

Operating Instructions:
- 10-
Preparations before use:
(1)Start up and check the power of SD20
Turn the power switch to “ ON” , the system comes into
play. After the red indicator is bright constantly, the
corresponding icons on LCD segment screen will be
lightened to enter normal preview state.
At this time, it can view the following items on LCD
segment screen:
A.Record mode: The current record mode can be viewed
on the top left corner of LCD segment screen, “ ”
indicates the video recording mode and “ ” indicates
the voice recording mode;
B.Photo shooting prompt: The shooting icon “ ” can be
viewed on the LCD segment screen. The icon will twinkle
once when shooting one photo;
C.Power icon: The power icon “ ” can be viewed on the
top right corner of LCD segment screen. The icon will be
bright constantly after the system coming into play; and
the disappearance of the icon means SD20 is shut down
or enters the standby state;
D.Video recording duration: Duration of the current video
recording file is displayed on the middle line of LCD
segment screen, such as “ ” . The video recording
duration will start displaying when pressing “Record” key
once, and it will stop when pressing “ Record” key once
again.
Note:
The video recording duration respectively on LCD segment
screen and TFT display screen is displayed synchronously;