User's Manual

- 24-
You can use the attached remote control of SD20 to
control the video recording, photo shooting, stopping
and laser function turning on/off. The red indicator on
the remote control will twinkle once when you press any
of the following keys:
7.Remote control
Record
Shutter
Stop
long pre s s “Shu t te r”
key for 3s can turn on and
t u rn off the las e r funct i on
Please follow the steps below to code the remote control
before use to realize the correspondence of remote
control and SD20:
1.Turn off SD20, press and hold “ Record” key, turn the
power switch to “ ON” , and then release ” Record” key.
Press both “Record” and “Stop” key on the remote control
once within 3s to finish the remote control code pairing
process. SD20 will tick twice after coding the remote
control successfully.
Note:
a.Use wireless remote control to control SD20 can check
whether the code pairing is successful. The control
functions include: Video recording starting/stopping,
photo shooting, waking in standby mode, and laser
light turning on/off; SD20 will tick once for each
operation. In case of video recording stopping or laser
light turning off, SD20 will tick twice;
b.Remote control range: Remote control within 15 meters
in any angle horizontally without barriers;
c.To press “Record”, “Shutter” or “Stop” key on the remote
control in standby mode can wake up the system;