User's Manual
Table Of Contents
- 27-
b.In startup state, use USB cable to connect with the
computer, data stored in SD20 memory and the Micro
SD card can be read (at this time, LCD segment screen
will display the USB connection state icon);
c.SD20 may be in abnormal state if the USB cable is
inserted or unplugged improperly when connecting,
and re-start to recover.
12.Prompt of key tone
a.Press “ Record” or “ Shutter” key once in normal using,
SD20 will tick once to indicate the effective operation;
b.When stopping video recording, SD20 will tick twice;
c.SD20 will tick twice to indicate the successful code
pairing;
d.Press “Shutter” key in video recording, SD20 will not give
prompt;
e.When operating on TFT display screen, press “Menu” key
in preview state, press “ >” or “<” key to enter the menu
“Setup”, press “+” or “-” key to select the menu “Key Tone”,
and then you can turn on or turn off the key tone;
f.If the system is in video recording, press “Stop” key on the
remote control once, SD20 will tick twice to indicate the
video recording stopping;
g.If the system is in video recording, press “Shutter” key on
the remote control once, SD20 and horn on TFT display
screen will not give any prompt;
h.Press any key on the remote control in standby state,
SD20 will tick once to wake up the main system;