R English User's Manual 2.4GHz Color Wireless Camera Kit MODEL: A101 Please read this manual carefully and thoroughly before any attempt to install and operate this product and retain it for your future reference.
EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
TABLE OF CONTENTS INTRODUCTION Notice Approval Information (FCC/CE) Warranty Copyright Restrictions Maintenance PRODUCT Package Contents Feature Locations Adapter & Battery Clip 1~4 1 1~2 3 3 4 4 5~7 5 6 7 INSTALLATION & USAGE 8~13 Installation Fix the Camera Locate the Receiver Camera Channel Setup Receiver Mode Setup 8~10 11~12 12 12 13 SPECIFICATIONS 14 TROUBLESHOOTING 15
INTRODUCTION Thank you for your interest and support in our product and purchasing this wireless camera kit. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product. The camera features one CMOS image sensor and a transmitting module to capture the image and transmit them wirelessly. The receiver features a receiving module to receive and output AV signals.
FCC This product meets the requirements specified in Part 15 of FCC Regulation. Operation rests with the following two conditions: (1) The equipment should not cause any harmful interference; (2) The equipment must receive and process any interference, including any possible interference caused by operation mistakes.
Warranty AEE Technology warrants that this product will be free from defects in materials and workmanship for period of time specified. This limited warranty shall commence from the date of purchase. AEE Technology product's warranty is not transferable and is limited to the original purchaser. If the product is found to be defective then, as your sole remedy and as the manufacturer's only obligation, AEE Technology will repair or replace the product.
Restrictions 1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 feet away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance; 3.
PRODUCT Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if one or some is missing, contact the retailer for replacement. 1 Wireless camera 1 2 Wireless receiver 1 3 Mounting plate for camera 4 Holder for receiver 5 Antenna for receiver 1 1 3 4 5 6 7 8 9 10 11 12 1 7 DC 7.5V power adapter for receiver 2 1 6 DC 7.
Feature Locations 1. Camera MIC Hole Antenna Lens Channel Switch Universal Bracket DC Power Jack 2.
Adapter This product always conforms to the authenticated AC adapter.
INSTALLATION & USAGE Installation 1. Connect the power jack of adapter (DC 7.5V 300mA) or battery with battery clip to camera. a. Connect with adapter b. Connect with battery clip 2. Connect the antenna to the receiver. 3. Connect the receiver to the monitor/TV with AV cable. (Red socket for audio; yellow socket for video). Turn on the monitor/TV and select AV mode.
4. Connect the power jack of adapter (DC 7.5V 300mA) to receiver. Slide Mode Control switch to M position and the channel indicator lights up green. OFF - M - L * The receiver provides Power Off (OFF) mode, Manual mode (M) and Channel Scan mode (L). Please refer to Receiver Mode Setup section for more details. 5. Set the camera to one desired channel. Default Setting 1 2 3 4 6.
7. If the picture is blur. You could adjust the lens focus with lens adjuster to make the picture clear. Lens Adjuster 8. Mount the camera to a desired location. Desktop Wall Mount Ceiling Mount 9. Adjust the brightness, contrast and color setting of the monitor/TV to get the best display effect.
Fix the Camera Please follow the steps below if you want to fix the camera to wall or ceiling. 1. Fix to Wall 1.1 Secure the mounting plate to wall with screw; 1.2 Hang the camera on the hooks of mounting plate; 1.3 Push downwards the camera firmly. Mounting Plate Hook 1.1 1.2 1.3 2. Fix to Ceiling 2.1 Detach the universal bracket from the camera and then install it to the camera top for avoiding reverse picture; 2.2 Secure the mounting plate to ceiling with screw; 2.
Hook Mounting Plate 2.2 2.3 2.4 Locate the Receiver The receiver can be placed horizontally or vertically. When it is placed vertically, the supplied holder is required. Holder Horizontal Vertical Camera Channel Setup This camera has 4 selectable channels to avoid possible interference from other nearby wireless devices.
Receiver Mode Setup The receiver can support up to 4 cameras working at the same time. It provides Power Off mode (OFF), Manual mode (M) and Channel Scan mode (L). 1. Power Off mode: Slide Mode Control switch to OFF to power the receiver off; OFF - M - L 2. Manual mode: Slide Mode Control switch to M to enter Manual mode. In manual mode, the receiver channel won't change until you press the channel select/mode switch button; OFF - M - L 3.
SPECIFICATIONS Items Value Transmission Frequency ISM 2,400MHz~ 2,483MHz Antenna Type Omni Transmission Distance 100m (Without Block) Operating Temperature -10 C~+50 C /+14 F~+122 F o o Storage Temperature o o 1/3-inch CMOS 628 S/N Ratio Camera o o 85% RH Imaging Sensor 582 (PAL)/ 510 492 (NTSC) 40dB (AGC OFF) Horizontal Resolution 380 TV Lines Minimum Illumination 5 Lux/F1.2 Transmission Power 10mW (CE)/2mW (FCC) DC 7.5V 300mA Power Supply Consumption Current 80 mA (Max.
TROUBLESHOOTING When you experience the operation problems, please check and try the following yourself before claiming that it is the defective product or consulting the experienced technician. Abnormal Phenomena No image No sound Possible Reasons/Solutions Check whether the camera/receiver is connected to power supply and powered on. 1. Check if the channel of receiver is the same as that of camera; Snowflakes on image Noisy 2. Check the distance & blocks. Adjust the lens of camera.
R AEE TECHNOLOGY CO.