User's Manual

Night Vision
The built-in Infra-red lights in camera provide night vision for 24hours
surveillance. The Infra-red lights will be automatically activated in dark
places. The picture will turn to Black & White (monochrome) in Night
Vision status.
12
The camera has 4 selectable channels. You could adjust the channel
switch of camera to set the channel for multi-camera working or
avoiding the interference. Please tune the channel switch to the desired
channel as the following diagram.
Camera Channel Setup
CH1=2,414MHz
CH2=2,432MHz
CH3=2,450MHz
CH4=2,468MHz
Channel
Built-in IR lights for
5m Night Vision