User's Manual 2.4GHz Color Wireless Camera Kit MODEL: Bt502 Please read this manual carefully and thoroughly before any attempt to install and operate this product and retain it for your future reference.
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
TABLE OF CONTENTS INTRODUCTION 1~3 Notice Approval Information (FCC/CE) Restrictions Maintenance 1 1~2 3 3 PRODUCT Package Contents Feature Locations Adapter PC System Requirement Main Functions PREPARATION Fix the Camera Camera Channel Setup Software Installation ACCESS YOUR CAMERA VIA PC Access Your Camera Operation Bar 4~7 4 5 6 6 7 8~13 8 8 9~13 14~18 14~15 16~18
PARAMETERS SETUP WINDOW 19~25 Menu Security Setup Display Setup Alarm Setup Record setup Capture setup Plan task setup 19 20 21 22 23 24 25 SPECIFICATIONS 26 TROUBLESHOOTING 27
INTRODUCTION Thank you for your interest and support to our product and purchase this wireless camera kit. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product. The camera builds in one CMOS image sensor and one transmitting module transmits the captured image wirelessly. Notice Notice: 2.4GHz wireless camera works at ISM band.
FCC Infor mation This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Restrictions 1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 feet away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance; 3.
PRODUCT Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if one or some is missing, contact the retailer for replacement. ① 2.4GHz wireless camera ×1 ② Antenna for camera ×2 ③ 2.4GHz wireless receiver ×1 ④ Adapter for camera ×1 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑤ USB cable ×1 ⑥ Mounting hardware × 1 ⑦ CD-ROM ⑧ User's Manual × 1 Note: The pictures may vary from the actual objects.
Feature Locations 1. Camera Antenna IR Lights Lens PIR Sensor MIC Hole Power switch Power LED Channel switch DC Power jack 2.
Adapter This product always conforms to the authenticated AC adapter.
Main Functions Instant Watch The 502UA does instant watch for what is happening. It is easy to install and operate CameraViewer, an application program for surveillance. You can record movie and capture still pictures with software CameraViewer after easy configuration. Alarm Function It refers to the alarm against PIR Motion and Sound. Both can trigger the alarm. The monitoring image can be displayed on CameraViewer.
PREPARATION Fix the Camera The camera can stand on table, it also can be mounted onto the wall. The steps of installation are as follows: 1. Drive one hole in the wall. Insert one mounting anchor firmly. Insert a screw into the mounting anchor. Hang your camera on the screw. 2. Connect the camera to the adapter. Turn on the camera by sliding the power switch to ON position. The power indicator lights up. Camera Channel Setup The channel switch is marked with 1-2-3-4.
Software Installation Insert the software CD into the CD-ROM drive of the PC. This will launch the UR401 Setup installation wizard. 1. Install UR401 USB driver 2. Install Camera Viewer 3. Install MPEG4 codec 1. Install UR401 USB driver 1.1 Click on Install UR401 USB driver to install the driver. 1.2 Click Continue Anyway to install driver.
2. Install CameraViewer 2.1 Select language per your request from the down-list box. And then click OK. 2.2 Click Next to continue.
2.3 Fill in the boxes with your personal or public information. Click Next to continue. 2.4 Click Next to continue. You can click Change... to select a destination folder to install CameraViewer software per your request, and then click Next to continue.
2.5 Click on Install to install CameraViewer. 2.6 Click on Finish to finish the installation. The icon CameraViewer will be created on the desktop.
3. Install MPEG4 codec 3.1 Click on Install MPEG4 codec to install the MPEG4 codec. The following interface will pop up. Select a language per your request from the down-list box. Then click OK. 3.2 Follow the installation wizard to install MPEG4 codec. Finally click Finish. Connect the receiver to your computer with USB cable. Refer to [My Computer]/[Hardware]/[Device Manager]/ [Sound,video and game controllers] to check if the Trident Analog Video correctly installed.
ACCESS YOUR CAMERA VIA PC Access Your Camera 1. Connect the camera to the adapter (DC 8V 300mA). Turn on the camera by sliding the power switch to ON position. The power indicator lights up. Notes: This camera can also work on dry battery , please load three AAA batteries to the battery compartment at the bottom of camera with their polarities matched, and then slide the power switch to ON position, the power indicator lights up. The DC adapter will work instead of batteries after it is plugged.
3. Connect the receiver and your PC with USB cable. One of the channel LED lights up green. Now you can watch on your PC with the CameraViewer . 4. After the connection, double-click on CameraViewer icon your desktop. The following interface will be shown. on Channel of present monitoring camera Operation Bar Present date and time Setup MENU Image Field 5. Rotate the camera to a suitable angle for surveillance.
Operation Bar Channel buttons Channel on/off Channel loop on/off Mute button Volume slide block Split screen Pause Snapshot button Record Zoom in Zoom out Full screen IR detection on/off Sound detection on/off Schedule mission on/off IR detection configuration Sound detection configuration Record File Management Schedule mission configuration 16
Channel buttons: CH1,CH2,CH3,CH4 Click the right channel button to monitor image transmitted from the corresponding channel camera. Note: You can also press space key on your keyboard to select channel from CH1~CH4 in turn. Four channels to avoid interference: CH1=2,414MHz, CH2=2,432MHz, CH3=2,450MHz, CH4=2,468MHz Channel loop button Click the channel loop button to start looping available channels. Click channel loop button again to stop looping.
Full screen button Click full screen button to display image in full screen. Double-click on the image field to return display to the normal size. Note: you can double-click on the image display area to switch between full screen and normal view. Alarm settings PIR alarm Motion detected by the camera will trigger the alarm. The effective distance is 7~10m depending on different temperature. Click the IR detection button to enable the PIR alarm trigger. Click again to disable the alarm.
PARAMETERS SETUP WINDOW Click MENU button, the follow interface is shown. Click any item to enter the parameters setup window.
Security Setup 1. Check the "Enable password on startup", and then type a password in the Password box. Re-type the password to confirm it. 2. Click OK to confirm your setting. 3. If you exit the CameraViewer window and re-enter, the following interface will pop up. Type the password you set in step 1, you can enter the CameraViewer window.
Display Setup [Camera Alias] Aliases can be made to different cameras. For example, make baby room as an alias to camera in channel 1. [Channel Loop] Set the interval of automatic loop. [On Screen Display] Three options can be selected to display on CameraViewer window: Date, Time, channel & name of the camera you are accessing. [Video Adjustment] Standard: Select PAL or NTSC to match your camera standard. The mismatch may cause faulty image display.
Alarm Setup [Alarm setup] 1) Select the camera from which you want to receive alarm. 2) Select the alarming type by checking Open move alarm or Open sound alarm you like. Note: Open move alarm will trigger the alarm while open sound alarm will trigger the alarm. [Operating of alarm] This is the countermeasure to alarm, warning you something unpleasant happening. When the camera alarms: Record: Enable the recording type when alarm is triggered.
Record setup [Record File Path] Click Change to select the location in which you want to save the record file. [Record File Setup] Compression: MPEG4 File Format: AVI Image Size: Three image size per your request: 720*576, 352*576, 352*288(PAL); 720*480, 352*480, 352*240 (NTSC). Frame rate: 5,10,15,20,25fps (PAL); 5,10,15,20,25,30fps (NTSC) [Storage Strategy] Set the limited size for total storage and single file.
Capture setup [Picture Path] Click Change to select the location in which you want to save the captures. [Picture Format] Compression: JPG Image Size: Three image size per your request: 720*576, 352*576, 352*288(PAL); 720*480, 352*480, 352*240 (NTSC). [Storage Strategy] Set the limited size for total storage of captured pictures.
Plan task setup The list of CHx, Timing, Operation displays your setup of plan task. [Task Strategy] Set the alarming frequency: daily alarm, weekly alarm, monthly alarm or alarm only once. [Timing] Scheduled record time [Operation] Set the duration for recorder video or set the duration and frequency of capturing still pictures. [Channel] Apply the above settings to the channel you select. 1. Click New to start to set a schedule. 2.
RECEIVER CAMERA SPECIFICATION Imaging Sensor CMOS Total Pixels View Angle Minimum Illumination Transmission Frequency Transmission Power Modulation Type Bandwidth Power Supply Motion Detection Distance Motion Detection Angle Sound Control Sensitivity Consumption Current Unobstructed Effective Range Night Vision Range Dimensions(W × D × H) Weight Receiving Frequency Intermediate Frequency Demodulation Type Receiving Sensitivity Transmission Interface Dimensions(W × D × H) Weight Operating Temperature Stora
TROUBLESHOOTING If the PC Camera is not working properly, these suggestions might help you eliminate the problem. If is still does not help, take it to your local retailer for assistance. Problem Cause and Remedy Forget the password to access the setting interface. You need to remove the CameraViewer software and and re-install it. No image displays at present channel. 1. Make sure at least one channel is ON. 2. Signal is weak. Relocate the camera or remove the obstacle around it. 3.
S-M502G190011